Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

2004 Sportsman runs on one cylinder when cold


dirtking

Question

Any Ideas? My 2004 Polaris Sportsman 700 only runs on one cylinder when it is REALLY cold. I had it up to LOTW last weekend and when I went to start it, it runs rough and doesn’t have much power. Well after driving it for 5 - 10 minutes it warmed up? enough and started firing on both and I had full power and it worked fine.

Has this happened to anyone else?

Link to comment
Share on other sites

3 answers to this question

Recommended Posts

  • 0

You would first have to isolate the problem as to whether it's electrical or fuel. If it is possible, check for spark at the plug when it is acting up. If you have spark, then you more than likely have a jet in one of the carbs that may have a little crud in it. When an engine is cold, it requires a little more fuel until it warms up, after your warms up, it is pulling just enough fuel to run better. Maybe the atv guys could give you a little more to go on, but I'm just basing this on simple mechanics.

Link to comment
Share on other sites

  • 0

Does that unit have two carbs? If it does I would guess you had some condensation freeze up in the one carb and when it warmed up it started flowing again. A little ISO-Propyl would cure it if there is moisture in there. When we ride sleds out west we always make sure to fill the tank at night so there is no room for condensation as the sled cools over night, this makes it harder for water to get in the fuel supply. If you don't have seperate carbs, I don't know why you'd have this problem if it isn't electrical...

Link to comment
Share on other sites

  • 0

Quote:

If it is possible, check for spark at the plug when it is acting up.


Only problem is whem it acts up it is below 0 and more likely way below 0 - makes it tough to wrench on things - plus the spark plugs are buried under everthing - I don't know how you mechanics do it!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Sorry to hear that Duff. Will give my GSP's an extra scratch behind the ear for you guys today
    • Aw, man, sorry to hear that.  Shed some tears and remember her well.  They all take a piece of our hearts with them; some more than others.
    • yes sorry for your loss..  our dogs are always special...
    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.