Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

What is your favorite ice - crappie method?


portageman

Recommended Posts

Once Crappie Keith showed me the "lift" method, I've been using it ever since. I used to think crappies hit a bait mostly on the fall. I'm amazed at how often they won't strike when you jig at their level but if you lift it above them it triggers them into feeding mode.

Link to comment
Share on other sites

My favorite method was to use a small glow buckshot rattle jig with a couple of maggies. But, I'm thinking after picking up a few of the new #3 Chubby Darters in glow colors, I may change my mind. grin.gif I like to use my house or portable as a warming house and work maybe 15 or so holes around the house with my flasher in tow.

MJ

Link to comment
Share on other sites

I use small hair jigs or plastics.I'll drop down to them ,then preform a lift to trigger the strike.Running the fish up to their ceiling to force the issue is key.

Thanks Juggs,you ole fart!

Hitting the Horn with Mallard to do some lifting or should I have said hoisting.

Link to comment
Share on other sites

Upsizing to plastics is by far my most productive winter tactic. 2-inch Berkley Power Minnows and size 4 Ratsos are my go-to's. Run and gun and stay on the move like Borch said. Also don't be afraid to fish only a couple feet below the ice... and nothing is too shallow in the winter for big slabs either, don't always assume they're out deep wink.gif

Link to comment
Share on other sites

I agree in some waters upsizing may be the ticket.

However in some water the reverse is true.

You should have all sizies to give the fish want they want at any given time which will change throughout the ice season,depending largely on available forage and oxygen levels.

On the lakes in our area getting big is a detriment when fish seem sluggish.

If a fish will come up to investigat a bait ,it usually wants to feed.

Finding the right pattern will catch those fish.

Runin & gunin may not be the answer looking for those few fish that are aggressive.

If you are marking a lot of fish,finding their trigger will put more fish in your bucket with less work.

I do love during late ice to run & gun.

Staying on top of active fish may be the way.

Each day is different and to be versatile will make it

more fun on the ice for everyone.

Link to comment
Share on other sites

Early ice... I like to find the fish suspended over deep water and i almost always catch most of my fish in 2 or 3 holes.

Late ice... I move between up to 15 to 20 holes in pretty shallow weedy water. The best is fishing about 2 feet below the ice and watching the crappies come in and bite

I always use fairly small jigs (#6 or #8) with wax worm euro larvae or small plastics. Every once in awhile i'll be forced to use a minnow on certain lakes.

Link to comment
Share on other sites

Scotty. First off you want to downsize the photo so it doesn't take up too much room. Then go to a photo sharing site like Imageshack.us or Photobucket.com. If you go to Imageshack you need to click "browse" and locate the picture you want to host. Then click "open" to get the photo in the window. Then click "host it" . In a short time you'll have a lot of choices to upload. I use the "hotlink for forums (1)". Rightclick and "copy" the and go back to FM. Then rightclick again where you want the photo, rightclick "paste". After you "continue" you should be able to preview your post with the picture.

twinlake00726yjdk1.jpg

Good luck,

Corey Bechtold

Link to comment
Share on other sites

i like to use a really small jig like a shrimpo and jig it right on there noses and then get them to chase it up a foot or two and then they usually hit it because the seem to commit to the bait. then i put a dead stick in my other hole and keep the minnow 4-5 feet off the bottom to get the cruisers.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.