Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

how do you pull your suitcase style out??


JigginIsLife

Recommended Posts

I've hadn't had much problem pulling it, I've got the 1060.

I do know that with wet snow, it really bogs you down...I've been thinking about applying some ski wax, to the bottom of mine this year. That will mean that I'll have to anchor the floor down too. It already slides enough as it is when set up, warmed, and after stepping in and out.

Link to comment
Share on other sites

I own a clam 5600 house as well, it does get hard pulling.. what i do when pulling out the house is set it up first and throw all the fishing needs inside the house then pull it..with the windows(or door open a bit) open so there is some wind flow through the house.. doesn't hurt to try it..

Link to comment
Share on other sites

Make a sled and pull it out.

You'll need

1.5" Roofing Nails

A couple 6 foot sections of 2x4's

1 Five gallon Bucket

A saw

A drill

Some thick rope

Cut the bottom out of the bucket. Now cut straight down the side of the bucket. Flatten the curved pail sides. Saw to fit and attach the 2x4's to 3 sides of your flattened pail. These are the railings of your sled. Nail them together. Drill a hole on each side of the front railings of your in-progress sled. These will be where you attach the rope to pull your sled. Attach the rope and knot the ends so they don't pull through the drilled holes.

One other tip, cut a curve into the front of your 2x4's so you have an elevated tip on your sled. This will keep snow from pushing into the sled. Or consider using 2 5 gallon pail side by side to create a wider sled. You can use shearpins or some such to keep the two sections adjoined.

I will try and take a picture of this sled when I get a chance. I built it to pull out my suitcase spearhouse, but I've used it on the clam 5600. It's nice to use this with a an early ice sled to pull everything out versus stacking things on top of the suitcase (where they may tip off when walking up a steep lakeshore for example). Altogether it added an extra 10 pounds to what I'm pulling out and works great on snow and ice with a little ski wax.

Link to comment
Share on other sites

They are called suit case for a reason. They fit in the trunk or in alot of cases the truck bed. You can't pull them on the snow. I know, i made that mistake. You need a sled type. I sold my 5600 becasue it wasn't worth having a floor, you trade to much to have it!. Plus you can store all your gear in the sled of the Voyageur. I did make a ski kit for mine and it was pretty good but you loose 2 holes to do it. Which that doesn't matter because you can only use 2 holes in the 5600 anyway with 2 people in it-NO ROOM

Link to comment
Share on other sites

I don't know if Da_chise's is better or easier but I have a set up built for that purpose.

Basically a 2 x 4 frame built about 12 inches up off two wooden water skis and the width of the fish house. Very stable and you can lay your gear on top. Strap it on any way you decide. The only cross members are at the top so you have the width of water skis to keep on top of the snow and 12 inches of clearance between them. Mine is about 5' x 5' square and maybe 16 inches tall over all.

Those aren't specific building instructions but maybe you understand where I'm going?

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.