Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Which fluorocarbon brands do you prefer?


CALVINIST

Recommended Posts

Floroice is a copolymer, which is a mono thats coated in fluorocarbon, so you get the best of both worlds. I personally like P-Line Floroice myself.

I generally don't use a 100 percent fluorocarbon through the ice, I like the way the copolymer performs a lot better. Not strength is awesome, its very durable line, the memory is great, and its invisible in the water. I use it on everything from 2 pound test panfish rods all the way to 8 pound test pike rods...

Link to comment
Share on other sites

I am with Matt, I really like the P-Line Fluoro-Ice. It just really handles well in the cold. I go with 2 lb for panfish and 6 lb on my walleye rods. I have found the 2 lb holds up a lot better than most monos or other hybrids. I normally have to switch out line every 2-3 times out, but with the Fluoro-Ice, I can make it most of the season on one spooling. Great stuff.

Link to comment
Share on other sites

After my experience dropshotting and catch pike in the Upper Peninsula this past August, I will keep using Vanish. I know there was a lot of hubbub about Vanish and knot strength several years ago when it came out, but I have never had a knot fail due to the line. Have been using 2 lb for years on Power Pro through the ice, connected with a double uni knot. Then a polamor or improved clinch on the jig.

Last year I tried the Vanish Transition on my walleye rods ( 8 lb ) and like it said, bright gold in the sunlight, and just enough close to the top of the hole to detect any line shifts due to a bite, two foot down it dissappeared.

Link to comment
Share on other sites

I use a palomer know for my fluoro/hybrid. The most important thing when tying any kind of knot with fluoro is to make sure it is lubricated when you tie it. You can do this by using water, line conditioner, or even spit. The properties of fluoro makes friction when you tie it and that creates heat and that compromises the strength of the line. I have talked to a bunch of guys that have had problems with fluoro knots and the dry knot is almost always the problem.

Link to comment
Share on other sites

Quote:

I am with Matt, I really like the P-Line Fluoro-Ice. It just really handles well in the cold. I go with 2 lb for panfish and 6 lb on my walleye rods. I have found the 2 lb holds up a lot better than most monos or other hybrids. I normally have to switch out line every 2-3 times out, but with the Fluoro-Ice, I can make it most of the season on one spooling. Great stuff.


2-3 times out,,,dang i got a buddy that changes his every 3 years if he is lucky ahaha, i do mine once a season.

Link to comment
Share on other sites

Quote:

Quote:

Now if I can only find a flourocarbon or hybrid in 1 lb, I'll be set!!!
smile.gif


Now those must be some spooky fish to need 1# flouro. I feel for ya.


Maybe 1LB Vs. 2LB isn't necessary for big wary gills, I don't know, but I have heard over and over again that switching to 1LB line can make a difference. Carrying an extra spool might be a good idea if conditions dictate. What's your take on it?

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.