Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

walleyes on tip-up?


CALVINIST

Recommended Posts

I haven't done much fishing for walleyes on hard water at all (panfish geek I am), but this year I am going to give it a go! This is probably a stupid question crazy.gif, but I have to ask! Does anybody target walleyes on tip-ups? What is the best set-up? Do they get gut-hooked? Just looking for options for fishing those two lines. Anybody have ideas?

Link to comment
Share on other sites

I like to do it on Mille Lacs on flat edges or on inside main lake turns with Metro lakes. I will throw a shiner on a JB glow treble (with a bead and blade of course) on a fluoro leader, and then whatever you like for main line. Haven't had any problems with gut hooking but I've also been pretty attentive to my flags.

Link to comment
Share on other sites

Quote:

I like to do it on Mille Lacs on flat edges or on inside main lake turns with Metro lakes. I will throw a shiner on a JB glow treble (with a bead and blade of course) on a fluoro leader, and then whatever you like for main line. Haven't had any problems with gut hooking but I've also been pretty attentive to my flags.


dumb question: do you have a pic or can explain how the bead and blade thing works?

Link to comment
Share on other sites

I personally don't really like tips ups for walleyes. Will they work sure but they aren't may favorite technique. I prefer to use a jigging line with a lure like a angel eye jr. typically for me it a jigging spoon that is by far for me. Then my second line a deadstick with nothing more complicated that a plain hook and live minneow. I will put usually with in 6 feet of my jigging line. The reason for this is that when I am jigging many time it acts as an attractor for fish but if they are not really aggresive they will come into check out my jigging spoon and then move over the the set/deadstick line and take that. This has prooved many time over to be a effective combination for me. I always have a jigging line going though. If the fish are aggresive they will smack the heck out of a jigging spoon.

Link to comment
Share on other sites

Quote:

I personally don't really like tips ups for walleyes. Will they work sure but they aren't may favorite technique. I prefer to use a jigging line with a lure like a angel eye jr. typically for me it a jigging spoon that is by far for me. Then my second line a deadstick with nothing more complicated that a plain hook and live minneow. I will put usually with in 6 feet of my jigging line. The reason for this is that when I am jigging many time it acts as an attractor for fish but if they are not really aggresive they will come into check out my jigging spoon and then move over the the set/deadstick line and take that. This has prooved many time over to be a effective combination for me. I always have a jigging line going though. If the fish are aggresive they will smack the heck out of a jigging spoon.


I have to admit that your idea is a good alternative to a tip-up. I suppose when dead sticking you need a flexible rod with good backbone? Also, whether you are dead sticking or tip-upping, do you set the hook as soon as you can, or do you wait?

Link to comment
Share on other sites

The bead and blade thing: You have to have it on there for your tip up to be considered a lure (thus allowing you to use a treble hook). It's been battled on with a lot of the pike guys and the DNR (you can read more about it by doing a search on quickstrike rigs in that Pike and Musky forum) will ticket you if you don't have it on there. Basically I just use some beads from the Lindy Rigs I tie in the summer and a small blade (the extra one you get in the package) from a Swedish pimple. They are small and out of the way, definately not an attractant but they make the lure legal. It really is silly but that's Minnesota, lots of gray laws and weird reasoning.

Hope this helps.

Link to comment
Share on other sites

Tip ups will spread out your fishing area. I use the dacron line as main line then tie a barrel swivel, then 4 feet of Flourocarbon line. Finish it off with a hook, split shot, beads, whatever you prefer. I like to clip on a tiny round bobber at the spool after I get the line set, so when line gets taken out, it's as easy as reeling it back up to the bobber to re set it in the same depth. f

Thermal tip ups are great (the round ones) they work really good but I like the wood frabil ones personally. Make sure the spool is well underwater to prevent it from freezing up.

Link to comment
Share on other sites

My only problem wih tip-ups is that they don't TIP UP. I can look out and see the reel spinning, but the flags are frozen down or stuck or just plain sitting there. I prefer the deadstick or bobber and the jigging spoon. It seems to attract the fish in the area and they attack the deadstick and leave the spoon alone.

Link to comment
Share on other sites

Ely Lake Expert,

That there is a Finkies! All you do is plop it over hole, set depth, put bait on, turn on auto jigger (adjust speed), drop down bait, light heater and let her go to work!

This thing is a tropper man! Very hardy!

Nice red light for night time fishing or blizzard!

Even in the coldest days and wet snow cond., I have never had an issue with flag not popping up!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
    • Sketti...  not out of a jar either!
    • Lol yeah I watched that
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.