Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Line for Crankbait rod and reel


Recommended Posts

I just bought a Abu Garcia Revo-S reel and a Fenwick HMXT 70M 7' rod at the Sport Show and was wondering what pound test and make of line I should put on it? I will be using it almost exclusivley for crankbait fishing for walleyes. Thanks

Ron

Link to comment
Share on other sites

I agree with Northlander. I use the Trilene 10# XT on my trolling rods and have never had an issue with it. Does the job so no plans to change at this time. Pulled in a 45" Pike with it that I caught trolling so I have to say that it's tough!

Link to comment
Share on other sites

If you don't mind me asking how much did you pick up the reel for at the show I really want ione of those but the lowest I've seen it for is $150.

I use PowerPro 10# Test 2-LB Diameter for most of my trolling but like mentioned above Trilene XT 10# works great also.

Link to comment
Share on other sites

The reel that he said he bought is a revo s, that retails for $100, the revo sx is $150 retail. For line you can't go wrong with braid of any sort, I use 10 to 12 lb fireline or power pro.

Musky999

Link to comment
Share on other sites

I guess for me it would depend on if you're trolling or casting, and how stiff the rod is. If the rod has a slow to moderate action, and you do a lot of trolling with some casting, a braid with a 6'-20' mono leader is a good bet. If the rod has a moderate-fast to fast action, and you do more trolling than casting, straight mono with some stretch would be a better choice. As mentioned, the 10 to 12 lb XT is hard to beat. No matter what the rod action, if you spend most of your time casting with a little trolling thrown in, a braid with a short mono leader would be a good way to go. Good luck, and let us know how whatever you pick works for ya.

Link to comment
Share on other sites

Just a question, I have a 6'10" Medium action rod, I'm cheap and can only afford one rod for casting for bass, trolling for walleyes, pulling spinners for eyes and dunking crawlers in the river.

I used 30lb Power Pro on it last year and it worked pretty good I thought, but can anyone see any potential problems with this set up? Will I gain alot more depth with 10 lb PP or lose less fish with mono?

Link to comment
Share on other sites

You'll gain more depth with crankbaits using lighter line with smaller diameter. And 10lb PP will get you more depth than say 10lb XT. Depending on the type of fishing you're doing and the water clarity, you'll probably be okay with 30lb PP in my opinion, but there may be instances where you'll want a leader such as Vanish when fishing clear waters.

I've got 20lb PP for my trolling rods this year and will be using 10lb PP for my casting/jigging/live bait rigging rods. Casting and jigging I'll just attach the lure directly to the snap swivel unless I'm in super-clear water. Live bait rigging.....I'm using Vanish leaders. This will be a season of firsts for me. I've seen first hand and second hand how well TO's setups work for him and they all make perfect sense to me. So I'm going to mimic his setups this year. smirk.gif I know...I'm not being very original. smirk.gif

Link to comment
Share on other sites

I'm very surpried to see the number of people who use braid/fused lines for cranks. I'm not saying its wrong, just hasn't worked all that well for me. I have a tendancy to not get the fish hooked as well or pull the hooks out of a fish when I fish with braid. There are times when its needed, when fishing in weeds and you are trying to get stuck in the weeds so that you can jerk it back out(which can trigger strikes) then braid is needed... Otherwise I use a co-poly or Floro.. usually 10 lb.

Link to comment
Share on other sites

Thanks for all the replys! Pierbridge...I paid $89 for the reel at Joe's booth. I plan on trolling almost all of the time. I think I will go with 10lb Trilene XT. Thanks again everyone for all the input!

Ron

Link to comment
Share on other sites

Dietz I use a 8.5' soft tipped rod when using PP. If you dont have a soft tipped rod either add 20' of mono or go straight mono. I like the PP because I get deeper faster without weight and I know when a lure is fouled up.

I do however use mono a lot with boards on windy days. Seems like I can keep the boards on the line better even when I wrap the PP it can slide off at times.

Another thing when long lining with PP is set your drag light so if your not watching your clicker will wake you up.

Link to comment
Share on other sites

Dietz, I like to use a St.Croix Avid crankbait rod with 10-4 braid (PP, Firewire, whatever). It casts very well and the tip section telegraphs the cranks action very well. If I'm in very clear water I will tie on a flurocarbon leader. For trolling (trolling rods, linecounter reels) I like 10lb XT as it hooks up nicely if we're running multiple lines and can't react right away. Then we use a leader that's appropriate; which might be 40lb or 80lb fluro to fight off biteoffs (trying that this year), 6lb or 8lb fluro when trolling slow in clear water, coated wire if i've been having problems with a particular toothy critter (one little run on tonka and one piece of structure on Pelican) although I'm not a real fan of the way the lure acts when I use wire.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.