I have a 2hp 8" auger. I'm thinking of getting and extra 10" auger (just the drill part, no motor) for the occasional lake trout or bluegill sight fishing trip. Most 10" augers are 3 hp. I'm wondering if the 10" auger will be too much for the 2hp motor.
Does anyone have a 2hp 10" auger? Does it work well?
I went ahead and watched some of the MLF coverage. Wheeler didn’t make the cut but the bigger story was the Poche/Avera fallout.
Kinda funny listening to both sides of the story and putting together the scenario, reading between the lines.
got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....
Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.
Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.
Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
Question
Huey
I have a 2hp 8" auger. I'm thinking of getting and extra 10" auger (just the drill part, no motor) for the occasional lake trout or bluegill sight fishing trip. Most 10" augers are 3 hp. I'm wondering if the 10" auger will be too much for the 2hp motor.
Does anyone have a 2hp 10" auger? Does it work well?
Thanks for any info.
Huey
Link to comment
Share on other sites
6 answers to this question
Recommended Posts