For quite a few years I have been running a prop with a knick about the size of a dime or maybe a nickle in it. I've never bothered to get this fixed. Is it worth the money to fix? I have 2 spare props I have scavenged over the years that do work on my motor but are not the ideal pitch for performance. I can go faster and hit max rps at full throttle with the existing damaged prop but not on either of my spares. They would get me back to the dock and keep me fishing if I really chewed up the existing. So, should I wait until I really screw up this prop or am I missing something by running with a small knick? All props are aluminum. What would a repair like this average for cost? Motor is mercury 50hp.
Wasn't terrible at a state park beach. Antelope island maybe. I wouldn't recommend it as a beach destination tho. Figured I was there, I'm getting in it.
The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there. About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
It's kinda gross with the algae in the summer but I got in it anyway. Wanted to see the increased bouyancy at work. You can kinda tuck yourself into a ball and you'll just float with your head above water. When dry off you look diamond encrusted with the salt.
We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity.
Question
Gus
For quite a few years I have been running a prop with a knick about the size of a dime or maybe a nickle in it. I've never bothered to get this fixed. Is it worth the money to fix? I have 2 spare props I have scavenged over the years that do work on my motor but are not the ideal pitch for performance. I can go faster and hit max rps at full throttle with the existing damaged prop but not on either of my spares. They would get me back to the dock and keep me fishing if I really chewed up the existing. So, should I wait until I really screw up this prop or am I missing something by running with a small knick? All props are aluminum. What would a repair like this average for cost? Motor is mercury 50hp.
Link to comment
Share on other sites
4 answers to this question
Recommended Posts