I recently aquired an trailer made of 2"x2"x3/16" thick square tubing that we parted out, and are now in the process of welding a frame for a house that will be a 6'x10' rectangle w/ an additional tapered triangle enclosure leading 4'up the tongue(like the rapala houses). I noticed some houses use 2x3" tubing while others use channel or angle iron and am wondering if 2x2 we're using is beefy enough. Anyone build one like this and if so any probs? Thanks
We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity.
Question
redhooks
I recently aquired an trailer made of 2"x2"x3/16" thick square tubing that we parted out, and are now in the process of welding a frame for a house that will be a 6'x10' rectangle w/ an additional tapered triangle enclosure leading 4'up the tongue(like the rapala houses). I noticed some houses use 2x3" tubing while others use channel or angle iron and am wondering if 2x2 we're using is beefy enough. Anyone build one like this and if so any probs? Thanks
redhooks
Link to comment
Share on other sites
6 answers to this question
Recommended Posts