Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

ATV stolen in Maplewood!


dougger222

Recommended Posts

Last week I woke up to find my 2002 Polaris 700 Sportsman gone. It was strapped on top of my 20ft trailer in my front yard with an older 2 hp Strikemaster auger with a new 10 in Lazer auger. The ATV was one of the first models which was black and silver. The ATV was lifted off the trailer and pushed down the hill a block to a get away vehicle. The Police were called and an insurance claim is being made, luckily it's got full coverage!

The Police officer said another ATV was stolen within a mile of mine recently.

I know the ATV is long gone as it will either be taken up North or chopped up but if anybody comes across the auger I'd like it back! It may end up in a pawn shop for all I know.

Also, if you think you live in a good neighborhood and you keep you atv outside think again!

BTW, some of you may recall my attempted Ice Castle post after turkey day, could be the same guys, who knows.

Link to comment
Share on other sites

Took me 2 augers, lots of tackle and rods, an ice chisel, ladder, lantern.............. to learn to keep my stuff locked up. Unfortunately wherever you live, there are those who think what's yours is theirs, or "need it worse than you". I wish you luck in getting your stuff back. You got the serial number for your auger?

Link to comment
Share on other sites

I believe the news had a story about sleds and atvs being stolen out of peoples yards just recently. I know chances are slim but I hope they catch these degenerates and you both get your equipment back.

Good Luck

Link to comment
Share on other sites

The ATV was reported stolen to the Police, DNR, and insurance company all within an hour of finding the atv stolen.

I did not get the serial numbers off the ice auger. If I see it though I'll know it's mine.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
    • Or he could go with leech~~~~~
    • Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
    • Blessed Christmas to all.  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.