Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Four stroke weight issues


Norsky

Question

  • 0

I have crestliner 1650 fish hawk with a 50 horse yamaha four stroke on it. I want to go up to a 90 horse Suzuki four stroke but that motor weighs 416 lbs! My yamaha now is 231 lbs. Just wondering if anyone has this 90 horse four stroke motor on this same boat or knows anyone that does?? Is the extra weight an issue? The max HP is 90 for the 1650 fish hawk.

[This message has been edited by Norsky (edited 02-29-2004).]

Link to comment
Share on other sites

10 answers to this question

Recommended Posts

  • 0

Norsky,this past July I purchased a 75hp 4-stroke tiller for a 1992 1775 Lund Pro-V. The motor weighs about 350lbs. The book shows that a 90hp weighs exactly the same weight. Oh. by the way, it is a Yamaha. I took off a 70hp 2 stroke Yamaha. Hope this helps.

Link to comment
Share on other sites

  • 0

I strongly recommend checking with the boat manufacturer. I have a smaller boat that I put a 4 stroke motor on (at just below the rated max HP) and I ended up with some small fractures in the transom. I talked with Alumacraft and they told me that when that particular boat was designed, the max HP rating did not consider the weight of the 4-stroke engines that are now available. They suggested bringing it into a shop and getting the transom reinforced and re-braced. This is a small boat, so these issues may not exist for a larger boat such as yours, but personally I recommend talking to the manufacturer and finding out if that weight/powe combination is acceptable.

Link to comment
Share on other sites

  • 0

I have crestliner 1650 fish hawk with a 50 horse yamaha four stroke on it. I want to go up to a 90 horse Suzuki four stroke but that motor weighs 416 lbs! My yamaha now is 231 lbs. Just wondering if anyone has this 90 horse four stroke motor on this same boat or knows anyone that does?? Is the extra weight an issue? The max HP is 90 for the 1650 fish hawk.

[This message has been edited by Norsky (edited 02-29-2004).]

Link to comment
Share on other sites

  • 0

Norsky is right it weighs 416 pounds, I looked at the online manual. Norsky, the above post about reinforcement is a good question, I'd ask at least two people, make sure one isn't the company you're buying the motor from. Best bet would be to call the boat manufacturer and ask them. Regarding speed, when I take my 120 pound kicker off my Prov I get a couple more mph's that's it. I'd go for it, especially if the boat maker okays the weight. Good luck, go fast.

Link to comment
Share on other sites

  • 0

I called Crestliner and one of the engineers said that they had figured the weight of the four stroke into the max hp ratings for this boat. He said it shouldn't be a problem but doesn't know of anyone that has the 1650 fish hawk with the 90 horse four stroke. I think I will probably just try it, if I go with the yamaha it will be 370 lbs which is only 140 lbs more than my current 50 horse. Hopefully she'll do around 45 mph, maybe more.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.