Old Lund Repair???

[MinnesotaMuskie]

I have an old Lund, 1980 or so, I use in Canada. Well we over loaded it on the way up and bounced a roller on the trailer to a bad spot and cracked the aluminum near the rear of the boat.

I cannot find a wleder to fix the boat unless I pull the motor and flip it over:)

The crack is about 4 inches long and located where the bottom of the hull turns up to the side of the boat.

Any suggestions??

[Steve Bakken]

I'm not sure how far Foley is from us, but we've been doing quite a few cracked hull repairs this summer and I'm sure that we could work something out.