Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Cleaning out carpet in boats?


jltimm

Question

7 answers to this question

Recommended Posts

  • 0

I had my windshield break while in Canada. With the glass, dirt, sand, etc. I turned to a professional carpet cleaner in my town. He cleaned and put scotch guard down for only $75.00. It looked like new again. Well worth the money in my mind!!!!

Link to comment
Share on other sites

  • 0

Once a year I take a pressure washer to my carpet, I just use clean water with no soap and spray it down good. Just make sure you let it dry before you put the cover on. I usually start at the front of the boat and work my way back then pick out the sand and debry out once it dries up. Try to stay away from your electronics also.

Link to comment
Share on other sites

  • 0

If you don't have a lot of oil, grime, etc. to deal with and just grit-n-sand......go with a shop vac. That's what I use and it does a great job.

Of course I have to use a little elbow grease to work out some areas. But saves $$$ on the pocket book.

Link to comment
Share on other sites

  • 0

I use a shop vac with the corner tool to get along the edges then get the vac with a beater bar and get the rest of the floor. Once you get the sand and dirt out then its time to wash. Elevate the bow as high as possible and pressure wash the deck working toward the stern. Now get the bristle brush out with soapy water and scrub the carpet then rinse.

Link to comment
Share on other sites

  • 0

I use the hand car wash. The power of the wand cleans everything and pushes all the sand to the back of the boat and you just go along the back edge with the vaccum and viola!! Clean boat for $3.00.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.