Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Nissan outboards


Lake Alice

Question

9 answers to this question

Recommended Posts

  • 0

I have never seen a nissan outboard on a fishing boat, I have seen them on sail boats and such. I know they have been around for a long time but not sure on there quality.

Might not be any help, just my two cents

Link to comment
Share on other sites

  • 0

Lake Alice - I am the second owner of an '89 Nissan 70hp outboard and I have been very pleased. Other than adjusting the carbs a couple of times it has been a strong runner.

The only thing I don't care for is that I believe the engine is a little louder than comparable motors.

As this was my first boat/motor I didn't really think of it at the time, but this is a minor complaint.

Also, I see that you are in White Bear Lake. There is a Nissan dealer close by in Forest Lake that can service the engine if needed and they might be able to tell you more about them.

I'd recommend a Nissan motor.

DB

Link to comment
Share on other sites

  • 0

Quote:

I'm looking at a 2002 Nissan 2-stroke 40.


Don't know about the older Nissans but the new one's are awesome.

Nissan TLDI models are direct fuel injection 2-strokes similar to the Evinrude E-TECS.

Of course they cost a boat load of cash.

Link to comment
Share on other sites

  • 0

I have a 40hp Tohatsu on the boat I am selling and it runs great. Never had a problem. I have been told that they are a pretty popular motor in Alaska because of their durability. Mine is a 1996 and as far as I know there has never been a problem with it.

Granny

Link to comment
Share on other sites

  • 0

The Bargain Cave at Cabela's stores always has a half-dozen or so Nissan outboards in it, presumably since they have been returned for some reason.

I believe the Tohotsu outboards are air cooled rather than water cooled, thus they are quite a bit noisier. Spent considerable time in AK and don't recall any great demand for them in salwater or fresh. Possible I guess.

Link to comment
Share on other sites

  • 0

I agree. We fished quite a bit in Alaska and do not remember any Nissan outboards off hand. We saw a lot of Honda tho'. Seemed like that was the most popular brand there for saltwater.

Link to comment
Share on other sites

  • 0

i got a 91 nissan 8 hp on my duck boat and it is pretty quiet for a 2 stroke and starts on the 1st or 2nd pull on the coldest of days over all i have been very happy with it

Link to comment
Share on other sites

  • 0

Tell ya what, I've worked on outboards for many years and can honestly say that the only thing I have done to a nissan is general maintainence. ie: clean and adjust carbs, lower unit grease, normal stuff.

Link to comment
Share on other sites

  • 0

Thanks DB and others for the input. This is a fuel injected motor, electric start, on a 2002 bare bones Alumacraft V16, karavan trailer, barely used. The guy wants 4200 for the whole deal, I think it was over 6 new. I think I gotta go for it.

LA

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.