Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Difference in Abu C4's? (4600, 5600)


Dan Brelje

Question

I am looking at the line of Abu Garcia C4's. I want a reel that will work well for a slop rod setup; i would like to know the differece between the 4600 and the 5600. Is it just the line capacity, or is there more? Any input about Abu's would be great.

--My dad is letting me try out his lefty curado before i buy anything (so i can see if i like left or right better), i may be able to pawn it from him for cheap. If this is the case, would it be a good slop rod reel?

Link to comment
Share on other sites

6 answers to this question

Recommended Posts

  • 0

The only diference between the the 4600 C4 and the 5600 C4 is line capacity, other then that they are the same. The curados are great reels. Curado will cast better also. 5600 would be better for heavier line (over 17 lb. test) Good Luck

Link to comment
Share on other sites

  • 0

My sister is looking for a muskie rig and she doesnt want to spend more than 100 on a reel. I told her to get a abu garcia because she wants one with 4 or 5 bearings and that can hold alot of 20 or 30 pound line. Which one of the red green or gold ones and which size reel and rod should she get?

Link to comment
Share on other sites

  • 0

Depends on what she will be tossing for lures. Probably the best all around for muskie is the C3(Silver in Color). The gear ratio on the C4(Blue in Color) makes you have to work a little harder when tossing the big baits. If she is just working buck tails and the lighter lures she would be just fine with the C4. I have both of them but all in the 6500. The C4 is on a 7'3" Rod that I use for lighter lures and the C3 is on a 6'3" Rod that I use for trolling and throwing heavy lures.

Hope this helps!

Link to comment
Share on other sites

  • 0

My man SunnyD is right on when it comes to the C3 to C4 the C4 is a high gear ratio(less torque) C3 is a slower gear ratio and has (more torque) the more torque give you less strain with big baits or baits with big blades.

Link to comment
Share on other sites

  • 0

I have used C3 6500 for years for muskie reels. I talked to a "reel" expert at a muskie show this past winter and he said that he personally would go with the smallest size Abu that he can because of their two piece frames. Meaning that the larger reel sizes have more torque on them and more stress because there is more space between them, therefore making them weaker and more suceptible to damage. The gears are the same in all of the sizes and it makes sense that less space between the sides the better. With all the new super lines, a person can still put high capacities of line on reels, because of the lower diameter. His guideline for a reel is it has to hold 140 yards of 14 lb test. If you use a line like Power Pro, you could have 150 yards of 80 lb test on that size reel and actually have more comfort with the smaller reel and less stress on the reel.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
    • Sketti...  not out of a jar either!
    • Lol yeah I watched that
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.