I have been adjusting my Jiffy 3 hp auger. It is running great now with one exception. As I get near the bottom of the hole and is starting to break through the ice, it does not have enough power and I have to lift it up and down and is makes the final cut. I think I need to adjust the fuel. Which one do I adjust the red screw? (I think this is fuel) and the screw to the right of the red screw. ( I think this is high idel) Let me know which one I should start with?
Wasn't terrible at a state park beach. Antelope island maybe. I wouldn't recommend it as a beach destination tho. Figured I was there, I'm getting in it.
The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there. About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
It's kinda gross with the algae in the summer but I got in it anyway. Wanted to see the increased bouyancy at work. You can kinda tuck yourself into a ball and you'll just float with your head above water. When dry off you look diamond encrusted with the salt.
We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity.
Question
Minnetonka
I have been adjusting my Jiffy 3 hp auger. It is running great now with one exception. As I get near the bottom of the hole and is starting to break through the ice, it does not have enough power and I have to lift it up and down and is makes the final cut. I think I need to adjust the fuel. Which one do I adjust the red screw? (I think this is fuel) and the screw to the right of the red screw. ( I think this is high idel) Let me know which one I should start with?
Link to comment
Share on other sites
2 answers to this question
Recommended Posts