mn86 Posted June 9, 2015 Share Posted June 9, 2015 opinions on best sinkers for fast deep water? oh yea, i should say sinkers that will work with team catfish slider rigs. thanks in advance Link to comment Share on other sites More sharing options...
556LaGue Posted June 9, 2015 Share Posted June 9, 2015 Disc or pyramid sinkers work well with that slider rig. I've been using the "no roll" flat sinkers lately. I secure it between 2 swivels and run my snell down from that. Works well also Link to comment Share on other sites More sharing options...
mn86 Posted June 9, 2015 Author Share Posted June 9, 2015 i used bot no rolls and pyramids and it would pin it was off really fast water though. i cant find pyramids heavier then five at any store Link to comment Share on other sites More sharing options...
556LaGue Posted June 9, 2015 Share Posted June 9, 2015 (edited) If you shop online, Bulletweights HSOforum has just about any weight you could imagine if that helps? Edited June 9, 2015 by 556LaGue Link to comment Share on other sites More sharing options...
derbier122x Posted June 10, 2015 Share Posted June 10, 2015 15 lb boat anchor. For real though. I've been hearing a lot of good things about the no rolls. Link to comment Share on other sites More sharing options...
aanderud Posted June 10, 2015 Share Posted June 10, 2015 no rolls are designed to hold in more current, but I haven't actually noticed that they do. I use bank sinkers almost exclusively. Pyramids probably would hold well in strong current too. Online sourcing is the only way to go with sinkers. Ebaaay is where I get mine. Link to comment Share on other sites More sharing options...
mn86 Posted June 10, 2015 Author Share Posted June 10, 2015 (edited) i was looking at some 9 oz bank sinkers the other day and thought 5oz of lead would be good for the spot i was going. boy was i wrong!!! aanderud is the eyelet on the bigger bank sinkers big enough to feed the sinker on the slider rig? and do you think 9oz is enough lead for fast current? Edited June 10, 2015 by mn86 Link to comment Share on other sites More sharing options...
mn86 Posted June 10, 2015 Author Share Posted June 10, 2015 i dont care for the no roll sinkers unless there is no snags and only use weights that work with e slider rigs for the simple fact with a no roll if a fish bring u into cover and jams up your weight your done. that weight is tied directly to you main line unless the weight pops free your going to break your line every time. with the slider rigs the eyelet will break and u lose the weight but not the fish 556LaGue 1 Link to comment Share on other sites More sharing options...
aanderud Posted June 10, 2015 Share Posted June 10, 2015 I've rarely used those slider things, so I'm not sure exactly how big you can go before you can't get the snap around the eyelet. I'm sure it varies based on the exact size/brand of the slider as well as the design of the bank sinker. The ones I use are just regular "bank" sinkers and I suspect you'd have problems with anything over 6 ounces. The "flat bank" sinkers seem to have a smaller lead collar around the eyelet, and you could probably go even bigger with those. 556LaGue 1 Link to comment Share on other sites More sharing options...
556LaGue Posted June 10, 2015 Share Posted June 10, 2015 All good points above. There's tons of different rigs for different situations. Get the ones that suit you best and experiment with them. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now