Hookmaster Posted September 23, 2014 Share Posted September 23, 2014 I am going to add hardwired lights to this boat. I will run them from a deep cycle battery. Do I run a ground from the battery to the hull and then run the positive wire from the battery to each light? Or do I run a positive and negative from the battery to each light? Quote Link to comment Share on other sites More sharing options...
delcecchi Posted September 23, 2014 Share Posted September 23, 2014 Run both wires to each light. Don't use the hull as a return. Quote Link to comment Share on other sites More sharing options...
marine_man Posted September 23, 2014 Share Posted September 23, 2014 When I did this a long time ago I pulled the corner cast cap off the boat in the rear, and the nose in the front & ran the wires down the rub rail / top of the gunwale... made it easy and clean.Good luck!marine_man Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.