Auger help

[Matt C]

I have a Strikemaster lazer mag. The bolt that holds the bit to the powerhead always comes loose, even after drilling just one hole.

Is there a fix for this?

Thanks!

[SwivelDigger]

Loctite it on if you don't have 2 take it off or not sure if you can put a longer bolt through and put a nut on other side?

[Fowlmouth]

Red loctite

[Matt C]

Fantastic! Thanks guys! I even have some in the garage.

[Tom Batiuk]

RED loctite will cure your problem but will also make it difficult to get apart later on. To disassemble it if needed just use a soldering iron and heat the socket cap screw up and it'll turn out.

[dairyman]

use a "lock nut"

[OnAFly]

Blue loctite is made to be removable, though I don't know how it reacts to very cold temps.

[Matt C]

Put the red loctite on.

Thanks!