MUSKY18 Posted July 30, 2013 Share Posted July 30, 2013 Just put a QAD drop away rest on my bow. Must say that going from a whisker biscuit to this rest, so far seems to be an improvement in my groupings. Here is the only negative thing......in adjusting the rest and moving it around to where it needed to be set to get sighted in, the drop hits the riser and makes more noise than I would like. Can I just put some mole skin on the riser to quiet the noise? Quote Link to comment Share on other sites More sharing options...
Scoot Posted July 31, 2013 Share Posted July 31, 2013 Yep Quote Link to comment Share on other sites More sharing options...
mnhunter79 Posted July 31, 2013 Share Posted July 31, 2013 If it has the lockdown technology , it should not hit the shelf at anytime, down position or on the drop. When the rest is in the down position there should be a gap between rest fingers and shelf. Quote Link to comment Share on other sites More sharing options...
Rippinlip Posted July 31, 2013 Share Posted July 31, 2013 Are you sure the rest is where it needs to be according to the nock?Otherwise Mole skin should take care of it. Quote Link to comment Share on other sites More sharing options...
MUSKY18 Posted August 1, 2013 Author Share Posted August 1, 2013 After looking it over and thinking about it, realized I had a brain fart and the rest wasn't sitting level. Got it leveled off and adjusted my sight a bit. Now shooting nice and quiet and great groups. Super glad I switched over to the drop away from the biscuit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.