I have a 1997 MinnKota bow mount motor with a foot control pedal. The sliding power adjustment (works like a rheostat) doesn't work at the lower power settings. The motor doesn't get power until the slide hits 8 or 9 out of the maximum setting of 10.
Any idea where I can get this repaired or if there is something I could do myself? Possible costs for replacement of the control?
Wasn't terrible at a state park beach. Antelope island maybe. I wouldn't recommend it as a beach destination tho. Figured I was there, I'm getting in it.
The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there. About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
It's kinda gross with the algae in the summer but I got in it anyway. Wanted to see the increased bouyancy at work. You can kinda tuck yourself into a ball and you'll just float with your head above water. When dry off you look diamond encrusted with the salt.
We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity.
Question
huskminn
Rob (or anyone else):
I have a 1997 MinnKota bow mount motor with a foot control pedal. The sliding power adjustment (works like a rheostat) doesn't work at the lower power settings. The motor doesn't get power until the slide hits 8 or 9 out of the maximum setting of 10.
Any idea where I can get this repaired or if there is something I could do myself? Possible costs for replacement of the control?
Thanks.
Good luck..........
Link to comment
Share on other sites
8 answers to this question
Recommended Posts