Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

fishing suckers


camando56

Recommended Posts

If you go back thru the threads, this was talked about this time last year. Basically, I use a 12 to 14" sucker (one hook thru the bottom lip and a treble on the dorsil fin). Drift or use your trolling motor with the rig 6 to 8 feet down has worked for me. One thing, if you get a strike turn the boat around and go right at the fish. Set the hook when it's swimming away. If you wait to long you may risk killing a fish. Caught a 51 last year with this method. Good luck.

Link to comment
Share on other sites

Hiya -

Few thoughts:

- You MUST use a quick strike rig. I know there are still those that argue that you can use a swallow rig and cut the line, and the hook will somehow magically dissolve and the fish will be fine, but it's a myth. Single hook swallow rigs are fish killers. 100% of the time. Period.

Circle hooks? I've heard and seen both good and bad. To me, quick strike rigs are the fail safe method. You either hook the fish cleanly, and hooking percentages are pretty high, or you miss completely. (And, sometimes, even when you miss the fish will come back and drill the sucker again. I've set the hook 3 times on one fish on at least 4 occasions.)

There are several good quick strike rigs on the market, but I like the Herbie Rig or Musky Mania Lift off rig style personally. (I make my own but that's the basic style.) Getting a sucker rigged up is a little bit of a wrestling match, and it looks like you're doing completely unnatural and probably illegal things to it, but they're very effective.

- Quick strike rigs only work if you strike quickly. The idea that it takes a fish a half an hour to eat a sucker is as big a myth as the 'cut the line' business. They can gulp down a 17" sucker in about 20 seconds. So when I say 'quick' I mean pick the rod up, feel the fish, put a little pressure on to get the fish to turn away, and hammer them. And - HAMMER them. Set the hook HARD. When I have people in my boat who have never done it before, I tell them to try and break the rod. (I said it to an All American defensive lineman once - so that's what he did. KAPOW - rod in 3 pieces. Landed the fish though smile )

- I most often use a bobber (it's a 'float' if you're a fancy-pants type, in which case you should probably be trout fishing instead. Dry flies only...). They're nice for getting the sucker out away from the boat a little, which has more to do with getting a good hookset than the fish being boat shy. I've had plenty of fish gobble up a sucker hanging off the transom with 5 feet of line out too. If I'm fishing deep (20' +) I'll heavily weight the sucker and drop it straight over the side, just so I can follow a break more precisely.

- Manage your expectations. Suckers aren't magic. Sometimes they work, sometimes they don't, just like anything else. Sometimes fish will peel the hooks off artificials and completely ignore a sucker. Other times they won't hit an artificial but will clobber a sucker. It's still muskie fishing. I enjoy it because it's something different, and, if you're 'sucker boy' while your partner is casting, it's pretty relaxing.

Good luck - and I'm serious about the quick strike rigs. Have them, or don't fish live bait.

Cheers,

Rob Kimm

Link to comment
Share on other sites

thanks for that post, I'm going out this weekend to try sucker fishing for the first time too with my father and brother. We were curious as to how exactly to rig them up, all of us throwing in 2c, but I'll throw your advice at them and hope we do well.

Link to comment
Share on other sites

there are lots of ways to rig suckers, lots of guys prefer the Fuzzy nose clips now. i tied up some rigs last night a took a few pics, maybe they'll help you with rigging, been using these rigs for a few years with extremely high hooking ratios. i use 90# and 120# Toothy Critter or Tyger wire (90# ties much easier) and I still prefer the rubber band rig, which i'll cut and tie through the solid ring after stringing it through the nostrils. this rig pops off great on the hookset.

****it's crucial to melt the nylon on your knots a little bit, otherwise they will slip, check the knots regularly

i use a 1oz weight above the whole rig to keep the sucker down a bit and use a small balloon for a float about 6 feet above the sucker when i'm running weededges. hooks are 5/0. it's important when you rig your sucker to space the hooks a bit and maintain balance when you stick them in the side of the sucker i.e. - not too far toward the head or tail, and not too high on the back to where they weigh your bait down or make it top heavy.

finally, treat your suckers gently and keep oxygen on them before you rig them up and they'll maintain maximum performance. i'll try to post a pic of a rigged sucker after this weekend.

2012-10-04_19-24-10_97.jpg

2012-10-04_19-22-58_282.jpg

2012-10-04_19-21-59_602.jpg

2012-10-04_19-22-07_441.jpg

FB_IMG_13493883252887399.jpg

Link to comment
Share on other sites

Well i was finally able to get out and try using some suckers. I was drifting along an isand working the weed edge when i looked down over the bow of the boat and there was a nice size musky, i would say well over 40, so i slowly reel the bobber in positioning it next to him and all of a sudden he sees the sucker, spins around and darts at it, chased it around for 20 min but wouldnt take it. I drifted away from the bobber a couple times as to not spook it but everytime i got close again he was right there playing games with it.

Link to comment
Share on other sites

Quote:
so i slowly reel the bobber in positioning it next to him and all of a sudden he sees the sucker, spins around and darts at it, chased it around for 20 min but wouldnt take it. I drifted away from the bobber a couple times as to not spook it but everytime i got close again he was right there playing games with it.

Patience!!! If I had a dollar for everytime I had a ski screw around with the sucker and never eat, I would have alot of dollars. But that's the fun of it and when they do eat, it's an added bonus. I would also have alot of dollars for the times I went out and never saw a fish but that's the way it goes.. I would consider that a good trip and a good start.

Link to comment
Share on other sites

Sometimes I swear the muskies know how to frustrate the angler. When I was out Sunday I had 6 muskies follow lazily, and just get close enough for me to see them before veering off. Yet I had 3 pike just absolutely destroy the bait (I had 2" of a 9" jerkbait sticking out of a 30" fish), including one that hit hard boatside. How can the most similar species be that aggressive, and muskies coming off the same spot be that lazy?

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.