frazwood Posted June 27, 2012 Share Posted June 27, 2012 We bought a lake cabin a couple of years ago...The former owner of this lake cabin was an amateur electrician and he did a lot of curious wiring projects (most of them I have removed and/or fixed).One of his wiring projects was to run a wire from the panel.. outside the house... underground to the lake... where he had mounted a receptacle on an old tree stump. The receptacle worked, but I removed it because I didn't think that it was safe and I didn't plan on using it (I actually removed the entire circuit).With all of the rain recently, the lake level has risen... to the point where that receptacle, if I had left it, would be underwater right now.What would have happened if that receptacle was still hot? (and before you ask, no... it wasn't ground-fault protected) Link to comment Share on other sites More sharing options...
Tator2k Posted June 27, 2012 Share Posted June 27, 2012 Would have just tripped the breaker. Link to comment Share on other sites More sharing options...
SkunkedAgain Posted June 28, 2012 Share Posted June 28, 2012 Assuming that he was using breakers. Link to comment Share on other sites More sharing options...
Surface Tension Posted June 28, 2012 Share Posted June 28, 2012 For reasons like that, is why they invented GFCI receptacles. I have an extension cord I made up for outdoor use with a GFCI receptacle. I take it from job to job because you don't know what your getting into. Link to comment Share on other sites More sharing options...
heavyduty Posted June 29, 2012 Share Posted June 29, 2012 Something like this could happen if the receptacle was under water and you were to make a path to ground. Could even happen if the GFI receptacle tripped and still had power in the box. Best bet is to do what you did and disconnect second chose would be to put a GFI breaker at the panel if the would be a chance of it flooding. http://www.startribune.com/nation/160717815.html?c=y&page=all&prepage=1 Link to comment Share on other sites More sharing options...
frazwood Posted July 3, 2012 Author Share Posted July 3, 2012 I disconnected the receptacle because the neighbors used it frequently and I never used it. Also, I don't trust much of the electrical work that this guy did, so unless I was sure that it was right... I pulled it and re-did it myself.My wife was rather disappointed with your answers... she was guessing that we would have been electrocuting fish or something like that.Thanks guys! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now