Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Lighted Bobbers


SkunkedAgain

Recommended Posts

I've had terrible luck with lighted bobbers. Either the rubber gasket breaks or the lights fail after only a use or two. I'm sick of buying $3-$4 replacement bulbs. I don't mistreat these things. They go right back into my tackle box after use and I turn the bulbs off immediately. They just seem poorly made to me - talking about the little stick bulbs where you push down the top to turn on the light.

Does anyone have a recommendation on a good lighted bobber?

Link to comment
Share on other sites

When I was in Ohio visiting some friends they were using a figure 8 looking gasket one loop slips on your pin style thil bobber the other loop you slip a small glow stick into it. You will still need to buy a supply of glow sticks but I wouldnt imagine those being too expensive. I dont do a lot of night fishing just something I have seen, hope it helps a little.

Link to comment
Share on other sites

Blue fox use to make the best one out there they had the light built in to the tip and I had much better luck with them than the new ones with the light on top of the bobber I did but some Lucky 7's I think they were called and had much better luck with those they were black and white if the seals leak spray wd40 on fingers and rub the seal and that should help the seal out from drying out too

Link to comment
Share on other sites

There was a great discussion on the Lindy Splash Brite bobbers last year.

http://www.hotspotoutdoors.com/forum/ubbthreads.php/topics/2596166/1

I posted a video from Lindy that shows how they work, but they really seem to be the ticket and now they seem to be sold everywhere and in different sizes.

They also work as as a good slip bobber once the battery dies.

My only complaint is they're hard to see at dusk. Once it's completely dark out they really glow well.

Link to comment
Share on other sites

I did too buy some of those splash brights as well I just haven't had a chance to try them out yet I think they me be the ticket I dropped one in my ice hole this winter to see how it work looks like a great idea hopefully they work out

Link to comment
Share on other sites

I had the same problem with the push pull lights I wrote a letter to the company that makes them. they said they were sorry and that they were redesigning them and the problem would be solved. 6mo later I got another letter stating the problems had been fixed and they included adozen of the new lights. They seem to be better but not perfect they are lasting a lot longer. I tried the lindy splash bright and they work great used them all last year with no problems.

Link to comment
Share on other sites

I was the same as you with luck with the old lighted bobbers. The lindy splash bright, while not the brightest on the market, is the most convienient, reliable lighted bobber I have ever used. Just picked up 6 of them last night in case they sell out quick locally this year.

Link to comment
Share on other sites

Cant go wrong with the Splash Brites. Especially with the smaller sizes they released last year.

The only things I don't like is that the batteries aren't replaceable, but they are so darn cheap you can just buy a new bobber. You also cannot shut off the light, but it is easy to swap bobbers for daytime use if you use a swivel with a leader and keep all of your terminal tackle below the swivel.

Link to comment
Share on other sites

splash brights all the way. one trick with them is if you want to use them during the day before the battery is dead just wrap one of the contacts with electrical tape so it doesn't contact water. there was a post about this last year I believe.

Link to comment
Share on other sites

I as well didn't like the batteries that you push the top down to turn on, like others they didn't seem to last. Last year I was looking at an old one that I had used once or twice and it quit working. I took a dental pick and if you look at the top between the plastic light part and main battery part there is a small strip of metal. What I figured out was that slim piece of metal has to contact a part in the plastic light part to complete the circuit. That thin strip of metal gets pushed tight against the battery and will not complete the circuit. I bent the thin strip out away from the body of the battery on one that I thought was dead and about to throw away. That fixed it, went through all my non working batteries and pulled that little strip out and all the batteries that were not working are now working again. It's worked for me hope it works for everyone else.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.