Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Time to do ice house maintenance, Wall mount heater questions!!!


KrappieKilla

Recommended Posts

I am looking at putting a wall mount lp heater in my 6x8 well insulated permy

I don't really know if you just hang these on the wall or cut out wall for venting?

Looking at a small one with BTU of 10000, 3 temp settings, will this be warm enough?

also blue flame vs. infrared which is better?

The ones I am looking at are "vent-free" can I still run this and sleep in it if it is just mounted to the wall?

Let me know, thanks everyone!

Link to comment
Share on other sites

read this on a review of an infrared one I am looking at, seems pretty insightful and applicable to ice house.

"I purchased this heater for my small work shop ( 10 X 12 ). The installation and gas line hook up was fast and simple. The copper line, fittings and valve cost just under $5o.oo. The building is constructued of 1 1/2 " thich aluminum and styrofoam panels and holds heat fairly well. Since the heater is non-vented I have to keep the windows open slightly due to oxygen depletion. The buzz is great but the pilot light goes out , lol. I should have gone the extra work and installed the vented unit. The pilot flame is exposed and vulnerable to blow out from even the slightest breeze but it is quick and simple to re-light. Great little heater for the money and cheap to operate."

Link to comment
Share on other sites

I put an 18K Btu unit in my 14x22 garage, housewarmer brand, NorthernT, It is direct vent, has infinite thermostat settings. It does well at heating, never had it turned all the way up. Even at the low setting, it is working great. It has an internal, small blower to move some air around. I will be installing a separate fan for more circulation. It came with good instructions for installation, templates, etc... no issues. Only need to purchase a tube of hi-temp cement for the exhaust vent.

I recommend a vented unit for safety reasons. I believe the non-vented units are legal to sell, but do not meet standard building codes, so illegal to install.

Vented units run $350 to $400 more per unit, than non-vented. That is the kicker, the attractive price. Good luck.

Link to comment
Share on other sites

I am looking at putting a wall mount lp heater in my 6x8 well insulated permy

I don't really know if you just hang these on the wall or cut out wall for venting?

Looking at a small one with BTU of 10000, 3 temp settings, will this be warm enough?

also blue flame vs. infrared which is better?

The ones I am looking at are "vent-free" can I still run this and sleep in it if it is just mounted to the wall?

Let me know, thanks everyone!

I have a 6x8 and use a small Mr. heater 10K BTIU wall mount. I sconstantly get cooked out of there when I keep it on constant "low" so you shoulnd't need anything bigger. Ventless will consume O2 so I mounted mine under a window to ghetto-vent it and I also use a CO detector as a precaution (never had it trip yet).

I'm not crazy enough to sleep in there with the heater on however.

I've considered dumping it for an IR unit that would run off my Honda but I'm notoriously cheap and won't upgrade until what I use doesn't work any longer or I decide it's time to upgrade the shack. I might consider sleeping in it if I changed to an IR but I don't fish outside of the Metro much and prefer the warm-cozy I have at home.

Link to comment
Share on other sites

Keep in mind that an unvented heater discharges water vapor also and if you have cool surfaces it readily condenses and drips. You still need ventilation or the heater will burn out all the oxygen in the house. The good ventless heaters detect low oxygen and shut off.....the bad ones...well....you might be sleeping a lot longer than you intended, if you get my drift.

Link to comment
Share on other sites

For a house that size, and well insulated, have you considered the Buddy heater? I know some guys have had issues with them, but in a house without a draft you shouldn't have any problem with it staying lit. You'd also have the advantage of being able to take it with you when you leave, so it wouldn't get stolen. You can hang them on the wall or just set it on the floor.

We have a 10,000 BTU ventless for a 14-foot trailer we converted to an ice house. It doesn't have much insulation and plenty of draft coming in, and we get cooked out fairly easily.

I would think in a 6x8 house that's well insulated you'd cook in no time with a 10K unit, even on low.

Link to comment
Share on other sites

if you buy a wall mount i would go with the blue flame over the infrared. i had a big vent-less wall mount in my 8x12 and it cooked me out all the time. i also had no problem sleeping in it either. i did put 2 of those little circle vents in there for safety but it seemed to burn very clean.

Link to comment
Share on other sites

Be safe, do not use a vent free heater. I have a 6x8 and I use a 12,000 BTU vented heater. Watch that on line auction site and you can pick up Orbis brand fairly cheap because they changed the name. You can use a smaller heater if you never open the door but I run tip ups a lot and the in and out changes a lot of air. Just think how big a door is compared to the house, thats a lot of square footage to open up.

Link to comment
Share on other sites

I have a 7x14 winnebago fish house im looking into getting a wall mounted heater that i can keep on while i sleep in the shack. My fish house is not extremely well insulated and there are lots of windows. From what I've read on here its smart to go with a vented heater and blue flame is getting recommendations. Just doing a quick google search it seems this kind of heater retails from 500-1000 bucks! Is this really what to expect for price on these? I was hoping to find something in the 150-300 range. Can someone point me in the right direction on where to look at purchasing a heater and possibly a store where i could get a knowledgeable person to talk to about it and a good deal? That would be great! Thanks in advance for any input

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
    • Or he could go with leech~~~~~
    • Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
    • Blessed Christmas to all.  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.