Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

ice fishing a dead swamp???

HandGunner

By HandGunner
in Ice Fishing

 Share

Recommended Posts

HandGunner Proficient

HandGunner

Posted
Posted

I see ppl out on kelsey round lake in andover. from what the dnr says its only so deep and full of bullheads and experiences bad winter kills. first I seen one car out there a week ago wondering what hes doing now i saw 3 cars and a portable ice house out there. whats going on out there? fishing or other stuff?

Link to comment
Share on other sites
KidMoe Enthusiast

KidMoe

Posted
Posted

About 7 years ago it had a ton of 3/4 pound sunfish and once word got out it got fished pretty hard. The following winter it winter killed fr the most part. It might have fish in it again. If you go out from shore about 200-300 feet there is a trench that goes to about 15 feet deep.

Link to comment
Share on other sites
HandGunner Proficient

HandGunner

Posted
  • Author
Posted

The dnr site has very little info about the lake the most i got was a above averege abundance of bullhead thats it. Ggogled it one site said it had bass crappies sunnies bluegill warmoth everything including gar! Says chances are you will get a bite and a good fishing. I asked once on here about it for bass fishing and was told its all a big muky swamp no fish hard access and its basickly a dead lake super bad winter kill. Should i give it a try? Ppl were close to shore scared to venture out since no ones out there except for close to shore. Would like some more info if possible this lake has me raising eyebrows

Link to comment
Share on other sites
GFNER Community Regular

GFNER

Posted
Posted

Believe it or not in the early 80s you could catch a walleye on every cast, heard the DNR used it as a rearing pond, also got nice sunnies crappies and some small bass. Word got out in the Coon Rapids Herald and that was all she wrote.....done!

Link to comment
Share on other sites
reinhard1 Grand Master

reinhard1

Posted
Posted

there were a few that tried it this year and now there are none that i can see exept for an occational one person. like the one poster said, it had some nice gills at one time. at the time i drove by and maby seen a couple of cars, then a dozen, then a practicle village. i wouln't waste my time there now. good luck.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Your Responses - Share & Have Fun :)

    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • Mike89
      Problems with Yetti

      By Mike89 · Posted

      good luck!!!   
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • Wanderer
      Problems with Yetti

      By Wanderer · Posted

      I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chef boyardee pizza from the box!
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Enchiladas 
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Venny neck roast!
    • Wanderer
      Merry Christmas

      By Wanderer · Posted

      Or he could go with leech~~~~~
    • Big Dave2
      Merry Christmas

      By Big Dave2 · Posted

      Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept