This may be a stupid question..

[c0untryf1sh3r]

The truck is a '98 Durango, about a week ago I went to put the passenger window down and it went down but when I went to put it up it would not go up. I had to go into work so didnt have time to look at it, but figured it was the switch and not the motor considering it went down. Every other window worked fine on the drivers side switch panel.

Of course this had to happen on the coldest day of the year so my wife took it up to the shop here in town to jump the motor just to get the window back up. The next day I noticed that the drivers side front window would go down but would take a little finessing of the switch to get back up, again not a motor problem.

Now, a week later, none of the windows work at all and neither do the power locks. The locks work if you use the key fob but other than that no. I talked to a guy at the Chrysler dealership in town and explained the problem to him and he gave me the deer in the head lights stare, so he was no help. I could see a bad switch being the problem when only the one window didnt work but not all of them.

Does anyone have an idea whats going on? Bad relay? Short somewhere? Broken wire/wires? I checked all the fuses and tore apart the passenger door to check for broken wires but no luck.

[Macgyver55]

Sounds to me like the switch module in the drivers door is bad. All of them route through that so its the likely place I'd try first.

[c0untryf1sh3r]

Thanks for the info. If that is the issue I would assume that thats why the locks arent working? Like I said it may be a stupid question

[Macgyver55]

Probably so, but I dont know what the switch looks like offhand.

No question asked in sincerity is a stupid one.....

[jmd1]

I have had to replace mine on my 04 and 05 dodges. Pop the assembly out, with a test light you can check to see if the switch is working or if it is the motor, i am guessing the switch.