Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Anybody use small snap swivels to switch out spoons, raps, etc


FLAG!!

Recommended Posts

I have used the little snaps without the swivels, not so much a snap but a hook. I have used on some summer stuff too.

I have used them in the winter on my forage minnow spoons, and some other stuff, if you use too small of one it is hard to get the hooks on. I believe there are some on my winter minnow raps? if I am thinking of the right name for the jig. It is used on the center hook (treble one) Can't remember the name but they work ok. I heard about them on one of the fishing shows to put between your spoon and hook so you can slide a minnow head on the treble and it stays on better/longer....in-fisherman series I believe

Link to comment
Share on other sites

I heard a guy say once that you should have a swivel on every line no matter the season to help prevent line twist. I never try it only because it doesn't look right when connected directly to the jig/rag/spoon. It just reminds me of how I fished when I was a kid. I've contemplated using a leader with a simple swivel, but I think that would just deter me from switching presentation as much as I would like to. I'm no expert on swivels and when/how to use them so I stay away. Maybe someone can help fill me in as well. But on the other hand I've heard that you NEED them for the darters or jigging spoons in general. Ever see you're line after jigging them for 20 minutes straight without a swivel, not ideal

Link to comment
Share on other sites

I use the tiny snaps. Sometimes can be a challenge with cold hands, but I always have some hemostats nearby. That helps.

I especially like to have them on my kid's line...he always wants to try something else...now he can do it himself without taking 10 minutes to tie a knot.

Link to comment
Share on other sites

I use a spro barrel swivel with a leader of line, then attach a snap, cross lock, or no knot. The leader of line should be shorter than your rod so you don't reel the swivel into your line guides. This prevents line twists and gives your lure more action.

Link to comment
Share on other sites

I use a spro barrel swivel with a leader of line, then attach a snap, cross lock, or no knot. The leader of line should be shorter than your rod so you don't reel the swivel into your line guides. This prevents line twists and gives your lure more action.

X2

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.