Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

I am not too bright... how to aim '98 K1500 headlights...

BoxMN
 Share

Recommended Posts

BoxMN Grand Master

BoxMN

Posted
Posted

I can't for the life of me figure out how to lower my headlight aiiming on my 98 k1500. I see the torx screws that I think should be the adjustments, but when I turn them they don't lower or raise. I tried this when it was new, and didn't work then, and just gave up. 13 years later, I am finally sick of it... doh! hahaha!

How the heck do you adjust the headlight on this vehicle? Do I need to loosen something first, then adjust? Thanks very much for any advice. I know am not the smartest bulb on the tree wink but this is killin me...

Link to comment
Share on other sites
Jeremy airjer W Grand Master

Jeremy airjer W

Posted
Posted

My best advice is swing buy a body shop. They will have the headlight alignment tools and get it right on they way it should be and for less than you might expect. Yeah, i know you could mess around in the drive way shining them on the garage dour for a couple of hours but they will never be where they should be. It will take the body shop guys ten minutes to align them.

Link to comment
Share on other sites
Macgyver55 Grand Master

Macgyver55

Posted
Posted

It would be a good idea to spray the adjusters with some penetrating lubricant a time or two before you go. If they havent ever been done before they are likely going to be tough to turn, and it may save a broken or stripped adjuster.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Your Responses - Share & Have Fun :)

    • smurfy
      Random Daily Pics

      By smurfy · Posted

      Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Duffman
      Random Daily Pics

      By Duffman · Posted

      Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Crow Hunter
      New boat question

      By Crow Hunter · Posted

      Sounds pretty sweet, alright. I will check them out, thanks.
    • Wanderer
      New boat question

      By Wanderer · Posted

      If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Crow Hunter
      New boat question

      By Crow Hunter · Posted

      Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Wanderer
      New boat question

      By Wanderer · Posted

      Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • smurfy
      Time for a smoke

      By smurfy · Posted

      Nords!
    • smurfy
      Time for a smoke

      By smurfy · Posted

    • Crow Hunter
      New boat question

      By Crow Hunter · Posted

      We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
    • smurfy
      What's on the grill

      By smurfy · Posted

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept