Looking for a stone legacy rod bag

[TravP]

Those rod slicks are a great idea.$10 to spendy for me but I will make my own and get the fabric from a fabric store.

I think for placing in the bag I will insert a 1 inch electric conduit cut in half length ways in the middle of sleeve to keep it expanded, close one end then rivet both ends to the plastic dividers then alternate ends.

I also thought about taking a 1 1/4 thin walled pvc cutting it in half length way and putting a half cap on to prevent sliding anothe rod down the same way but I have not figured out how to anchor the pvc to the bags pvc

Not spendy when they cover up Thorne Bros rods.

[croixflats]

Sorry for the suggestions.

[TravP]

Sorry croixflats, my fingers type faster then my brain works sometimes. Thats a good idea. What do you figure you would have in to two of them when they are finished.

[croixflats]

I maid this for my fly rod a few years back. $8 for a snake skin patern vinal with a cloth backing and this was a third of the material used. Half hour on the sewing machine. I lost the rest of the material over the years but I measured this piece up and I can sew it down the middle to get 4 maybe 6 8 is pushing it sleeves out of it. Holds up to water just fine

Sorry bad day today.

[TravP]

If you could get a "stretchy" material that would work even better I bet.

Good ideas.

[Borch]

I maid this for my fly rod a few years back. $8 for a snake skin patern vinal with a cloth backing and this was a third of the material used. Half hour on the sewing machine. I lost the rest of the material over the years but I measured this piece up and I can sew it down the middle to get 4 maybe 6 8 is pushing it sleeves out of it. Holds up to water just fine

Sorry bad day today.

I've been making my own for years with ripstop nylon for my long rods. They make great gifts too for family members.

I love my Marcum rod bags with integrated rod tubes for 4 combos. Unfortunately they are no longer made. My Stone Legacy is strictly used for my longer laker rods and tackle.

[aczr2k]

Why would they discontinue the best bag they made? Whose the "big thinker" behind that plan?

[walleyeslayr]

I put 4 to a bag and one might be able to get 8 rods in with the sleeve's but I doubt you could get 8 combo units in as there would more than likely be no room for 4 reels on each side.

Gotta love the Stone Legacy bags and I treasure the 3 I have.+

I've got 7 in mine no problem. 4 on one side, 3 on the other. I use the 500 series reels or smaller. It is, hands down, the BEST rod bag out there. At least it used to be.

[buzbunni]

I'll mention it again.

If all of you Revolution lovers out there would just take a moment to call the company and let them know how you feel about them discontinuing production, they may see the light and make a production run for next year.

I call dibs on the first two off the line if they decide to start up again .

Seriously, give them a quick call. It will only take a minute.

I did.

1-888-858-4826

[aczr2k]

Yep I emailed them also. Can't hurt to let them know there is a demand for them.

[Craigums]

I put 4 to a bag and one might be able to get 8 rods in with the sleeve's but I doubt you could get 8 combo units in as there would more than likely be no room for 4 reels on each side.

Gotta love the Stone Legacy bags and I treasure the 3 I have.+

Harvy Ive fit more than 2 rods in a side before, you have to "break down" the reel handle so it rests against the body of the reel. A bit of a hastle but it works.

[TravP]

Called them already.

[CaptainMusky]

Have you guys checked out the bags by Croxton? They make a nice one that at least appears similar to the one you are talking about. I have never seen a Revo so not 100% sure, but maybe that is an option for ya.

[croixflats]

I get six easy in mine with a bit of snugness without breaking down the reels. With the sleeves inside will make it that much easier.

[hanson]

I'll mention it again.

If all of you Revolution lovers out there would just take a moment to call the company and let them know how you feel about them discontinuing production, they may see the light and make a production run for next year.

I call dibs on the first two off the line if they decide to start up again .

Seriously, give them a quick call. It will only take a minute.

I did.

1-888-858-4826

What about a pre-order? If we get enough guys to basically pre-pay and commit to buying, would they run a bunch of bags??

I've got a Revolution and have had it for what seams like forever. IMO... 6 rods is the max without breaking the reel handles down.

[croixflats]

I am sure it takes time to make these bags. How many would be patient to wait the duration, after all it is a spontaneous urge to have one of these. Comes march when it arrives who is going to care. Make an order now for next year who wants that? Good thought though.

Best we can do is petition for more next year and order early if there is a go to manufacturing.

[aczr2k]

I did get an email response back from customer service. Basically saying they have recieved many calls and emails and it has been discussed throughly to bring it back for next year. It was nice to actually get a response.

[buzbunni]

I did get an email response back from customer service. Basically saying they have recieved many calls and emails and it has been discussed throughly to bring it back for next year. It was nice to actually get a response.

Cool.

Hope to see them available next year.

If necessary, I think the preorder idea by Hanson is a good idea as well.

[NCLaker]

I think if they could find a way to get these our to more retail stores, they would sell a ton of these. When they were producing them, the only place I ever saw them was at the St. Paul Ice Show.

IF nothing else, they should try to sell the patent to one of the other reputable ice fishing companies and have them produce it. I would love one with the Vexilar name stamped on it

[TravP]

I think if they could find a way to get these our to more retail stores, they would sell a ton of these. When they were producing them, the only place I ever saw them was at the St. Paul Ice Show.

IF nothing else, they should try to sell the patent to one of the other reputable ice fishing companies and have them produce it. I would love one with the Vexilar name stamped on it

I would bet the price would be alot more then $50 if it had vexilar stamped on it...

[augernaut]

I thought a company in Ishpeming, Michigan (UP) had bought the rights to make the Revolution bag????? The are even shown that way in an ad in the In-Fish Ice Guide......

[harvey lee]

I agree Trav. Seems to me the last one I purchase a few years ago was that price or a tick more.

They are such a great rod bag if they were put back on the market I am sure they would sell, even for more.

[showags]

For those interested, they have them at hy creek dot com. I apologize if posting this is against the rules and if so, mods just delete.

[buzbunni]

I was just gonna post that!

Nice find. I'm ordering one.

[NCLaker]

Thanks showags! Pulled the tigger on an order with Hycreek today (they confirmed they still had them in stock). $65 w/ shipping ... should have picked up a year a go at the ice shoe for $40