Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Gordon Setters


DaSwede

Recommended Posts

First off, I am a lab guy, but this year I had to retire my hunting buddy because of his age and a bad shoulder. I have always been intrigued by pointers though. A friend of mine asked if I had ever looked into Gordon Setters. I started reading about them and looking at pics of them on the Internet, and they look like a beautiful dog. Just wondering if anyone hunts with them, and what kind of family dog they make? If it makes a difference, I strictly a pheasant hunter.

Link to comment
Share on other sites

I know some guys that have some. I have seen some good ones, some OK ones and some down right awful ones, never a great one.

I'm sure they are out there, but they were bred for years because they are so beautiful, and the hunting instinct wasn't a top priority for breeders. They are starting to come back however and there are some nice lines right here in MN. All setters are very sweet dogs and I would not hesitate to bring one into my home from a personality perspective.

If I was strictly a pheasant hunter and wanted a pointer I would look into the versatile breeds, Wirehairs, Dhrathars, Griffon etc. They are going to track wounded birds much better than any setter. Just my opinion....

There is a place in Pine City that is a hunt club and Gordon Breeder. I'm sure you could go see some dogs work there.

Let me know if I can be of any help.

Link to comment
Share on other sites

one of my buddies here has a few of them. I hunt with him and his gordons on occasion. His dogs are REAL good for pheasants. Very good pointers, hard workers and retrievers. They have real good pedigrees. He bred a couple of them a year or so ago and think still has one or two left. They of course now are a year and half?? I know he is willing to sell them CHEAP as he as too many now. I'm not sure he as put the work into them either? However, you could get a dog that has a great ped. health etc for real real cheap and work/ train it yourself if interested. I know he did say the instinct is there for the young ones he just hasn't had the time for all the dogs. Again, I bet he'll let them go for a real steal and they orginally sold for $700.

Link to comment
Share on other sites

I agree with setterguy. If you're set on a Gordon, do a lot of research and I'm sure you'll find a good one, you just may have too look harder than some other breeds. If I was going to start with a pointer I'd look to a good English setter(biased b/c I have one) a Britt or one of the other versatile breeds. Just seems like there's more options out there where you couldn't go wrong IMO

Link to comment
Share on other sites

Thanks guys. Ive done some research, and it looks like the breed is making a comeback, but has been breed more for show and competition than hunting. I'm sure I'll end up with another lab, but will also look into an English pointer. I just thought the Gordon is a great looking dog.

Link to comment
Share on other sites

MN is a great place to be if you want a field bred gordon. There are a lot of good breeders in MN and surrounding states. If you still are thinking you would want a gordon I would check out clearcut kennel.

I'll agree with setterguy that for only pheasants one of the versatile breeds are probably a better option overall if you want a pointer.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.