Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Honda Vs. Yamaha


Mike Stark

Question

i did a search and found no topics on the subject.

i am going to get a new 25hp tiller for a 16ft Lund Rebel (late 80's-2002 model).

most of the info iv found on the web is about older models.

whats the better motor? is the honda worth the extra cash?

Link to comment
Share on other sites

Recommended Posts

  • 0

Currently have a 2 8 40 225 yamaha. Had a 90 and 40 honda. All of which had zero issues. Gotta give the edge to yami - especially in cold weather conditions. The hondas i had seemed to be much more cold blooded in the fall and spring of the year. Not knocking the honda they were good motors. As far as 3 vs 2 cyl as you mentioned the 2 cyl will most likely be lighter and can be a benefit if you fish by yourself with less weight with yourself and the motor in the back of the boat. I sure wish they offered efi in the 25hp from yami or honda that alone makes a diiference in colder temps. Goodluck on your decision can't go wrong but i don't see 1200 bucks of "betterness" in the honda. Cheers!

Link to comment
Share on other sites

  • 0

I took a look at the specs as well... things are really stacking up in Honda's favor...

there's always the old adage, there's no replacement for displacement.. Honda wins that one

The weight difference is also interesting.. especially considering Honda's is a 3 cylinder. Honda wins that one as well

As previously mentioned, Honda has a 3 Cylinder, Yamaha has a 2 cylinder... the 3 cylinder will give you smoother idling... another Honda win...

Price factors in... Yamaha was cheaper.. but the performance differences might make that negligible.

marine_man

Link to comment
Share on other sites

  • 0

I think you're going to notice the difference in displacement to a certain extent, but mostly when fully loaded with people or gear.

I think you may notice the smoother idling to a certain extent... it won't be huge, but you may notice the difference.

The weight difference is negligible...

The difference in weight in the pocket book? That's tough to say. I think you'll be happy with either motor... they're both bullet proof... if you're planning on keeping this long term, as much as I hate to not say Yamaha, I think Honda provides a couple of opportunities that Yamaha can't right now. I'm guessing if you were able to look at the actual HP output of these two motors Honda would get the nod.

marine_man

Link to comment
Share on other sites

  • 0

this is something i plan on keeping for a long time...that is why im investing in a new motor. decisions, decisions. if im not mistaking, honda has a little better warranty as well. 5yr standard vs 3yr standard.

Link to comment
Share on other sites

  • 0

Neither one will ever give you a problem, so service is probably not a big issue. I own a Honda, but would not hesitate to buy a Yamaha. In my situation, my next will probably be a Yamaha since Honda jumps from 50 to 75 and my Pro-V will take a 60.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.