Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

WHAT KIND AND HOW BIG OF A HEATER SHOULD I GET????


ratherbefishin

Recommended Posts

WHAT KIND AND HOW BIG OF A HEATER SHOULD I GET, MY HOUSE IS 6' W 12' L 6.5' TALL.

THINKING OF GOIN WITH A UNIT THAT MOUNTS ON THE WALL, AND OF COURSE NEED TO KEEP ON LESS EXPENSIVE SIDE. I DID SEE A 10,000 BTU VENLESS ONE ON A SIGHT FOR AROUND 120.00 ANYTHOUGHTS ??

Link to comment
Share on other sites

stay away from ventless, I went with one and replaced it with a vented because of the moisture the ventless puts out, plus a ventless isn't safe if your going to sleep in the house.

my house is about the same size just add a v front where yours ends and I had a 10,000 btu ventless and it heated fine, but a vented heater is less efficient so now I think mine is 18,000 btu input so around 14,000 btu output. The funny thing is the bigger heater seems to heat the same as the smaller ventless, I think it because moist air holds more heat then dry air so a moist 70 feels warmer then a dry 70.

Link to comment
Share on other sites

I run an empire ventless 20,000 btu with a built in thermostat that works great in my 6.5 x 12. It allows you to dial it down to a very low flame but you can crank it up when you first fire it up to heat the house up in minutes. I sleep in the shack and have not had any problems yet, but I keep the windows cracked and run a fan to circulate. I also run a carbon monoxide detector, and the empire has a low oxygen sensor that shuts itself down for safety. The one nice thing about ventless is how long a small tank of propane will last. Very efficient.

Empire (HearthRite) Ventless 20,000 BTU Blue Flame Wall Heater

Price $229.95

ITEM #: BLUEFLAME20

* Built in thermostat

* Ideal for Fish Houses 14'-20' in length

* 99.9% Efficient

* Mounts anywhere on wall

* Easy installation

* LP Gas only

* Adjustable heat range from 8,500 btu - 20,000 btu

* Snap Start Ignition

* Pilot Equipped with Automatic Shut-Off and (ODS) oxygen depletion sensor

* Requires some air vents or cracked windows or fresh air

IMG_4221.JPG

Link to comment
Share on other sites

I have had no problems with my ventless heater(Blue Flame,wall mount). No moisture and I have three picture windows in my permanent. I do sleep in my hut and have a Carbonmonoxide/LP Detector running all the time(never a reading). The newer ventless heaters also come with a safety shutoff if it tips over, gets banged too hard or has not enough oxygen. I did put in two indirect vents in my hut for ventalation.

Here are some advantages and disadvantages.

About Ventless Gas Heaters

Ventless gas heaters are one of the most controversial types of gas heaters in the market today. This is primarily due to the fact that there are certain segments of the market that believe ventless gas heaters are actually more harmful than helpful. One thing, however, is certain. These heaters are becoming more and more popular with many people switching over to these sorts of heaters from conventional forms of heaters or fireplaces. Owing to the stark increase in the popularity and the controversial nature of these types of heaters, the following is an ‘all you need to know' guide on ventless gas heaters.

What Are Ventless Gas Heaters?

These are heaters that operate on gas and whose Unique Selling Point (USP) is that they do not have vents, and hence neither do they draw fresh air from outside nor release emissions outside. These types of gas heaters have been banned by some states as they are believed to be harmful to the user. Another facet because of which these types of heaters are gaining popularity is the fuel efficiency that they offer. The fuel efficiency of these types of heaters can go up to 99.9 percent.

What Are Their Advantages?

There are many advantages of ventless gas heaters. Many people choose such heaters for the following varied properties.

The primary advantage of these types of gas heaters is that they provide a fuel efficiency of 99.9 percent.

• Their efficiency levels result in a major reduction in fuel expenses for the user. This means that the volatility of the fuel market does not affect him or her to the extent that happens with conventional gas heaters.

• Furthermore, these same efficiency levels have lead to such types of gas heaters to be considered highly environment friendly.

• The ventless and highly efficient property of these types of gas heaters allow for better heating for the user as no heat is lost. In the case of conventional gas heaters, a good deal of heat is lost through their vents.

• There is a whole array of ventless gas heaters available in the market. Some examples include stand alone versions, wall mounted versions, gas log

versions, blue flame versions, radiant versions, etc.

What Are The Disadvantages?

There are no inherently harmful disadvantages of ventless gas heaters. However, some misconceptions do prevail among the masses. As a matter of fact, most of the well known harmful effects of these types of gas heaters are nothing but cases of bad maintenance and usage of the product. The following are some.

• One of the misconceptions is that ventless gas heaters cause asphyxiation. This can only be possible if there is not enough ventilation in the room where the gas heater is installed.

• The second misconception is also linked to the ventilation system of the room where the device is installed. Some people believe that carbon monoxide levels can rise to harmful levels and be particularly damaging. However, the carbon monoxide levels will never accumulate to dangerous levels in a room which is properly ventilated. Furthermore, it should be noted that all forms of combustion result in carbon monoxide emissions and in the case of conventional fireplaces the levels are much higher than gas heaters.

• One of the genuine complaints pertaining to ventless gas heaters is that their usage results in increased levels of humidity in the room. This is a real side effect, but should be countered easily with proper ventilation.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.