Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

med Otter fit in the back of a Jeep Cherokee?


JSK76

Recommended Posts

Looking for a 2nd, lighter 4x4 to use for hunting, fishing and just keeping some miles off my truck. Thinking about a Jeep Cherokee (classic) if my med Otter will fit in the back with the seats down. I,m only 5'6" so the front seats will be forward a bit more. I could remove the rear seat for the winter if it give me the room I need.

Link to comment
Share on other sites

I have a '99 Cherokee. My older (15 yr+) medium Otter fits in the back with the seat down. I am 99% sure that it fits in there straight even with some stuff overhanging the sled a bit. Otherwise, I know it fits in there on the slant. FYI, in my Jeep you lift the back "sit upon" section up and against the front seats then push the backrest down flat. Hope this helps.

Link to comment
Share on other sites

I wonder if the older non Otter II sleds were the same length as the Otter II's? I know the approach angle of the front of the sled was steeper. I'm pretty sure the the same length, someone correct me if I'm wrong.

Link to comment
Share on other sites

I'm only throwing this out there as something to consider: You'll have a wet drying ice house inside your vehicle. I had a Subaru Outback when I first got my Team Wild 2 man flip over and I hauled it for an entire winter in the back of that car. I used a rubber mat with a moving blanket on top to protect the seats/cargo area from water. However my windows were constantly fogged up from all the condensation in the car. One morning I had to scrape 1/4" of snow/frost off the inside of my windshield before I could leave. Keep in mind if I got home Saturday night from fishing and was heading back out Sunday morning I left everything in the car and the car outside. This last year I stored my ice house in my pickup all winter, it was great and I don't think I'd ever want to go back to having to worry about the water.

p.s. On my outback seats folded same way as Raider4ever's jeep. The sled fit the best when I put it in backwards but I'm 6'0" and Subaru's don't exactly have a ton of room so seat was tilted back slightly. Sled fit either way but front first was tight, back first fit well and left me room under the front of sled to put additional stuff like my jacket and [PoorWordUsage].

Link to comment
Share on other sites

I leave all my ice fishing gear in the back of my SUV all winter long since it is mostly used for ice fishing and I fish regularly. One thing I have learned is to always leave the window(s) down at least a crack to allow the moisture to escape. (I too have had to scrape condensation off the inside of the windows)

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.