Shorelunch Posted May 19, 2010 Share Posted May 19, 2010 I have a new to me 05 Lund Pro-V. I switched out the 24v PowerDrive for a 24v Terrova. Used the Terrova for the first time on Sunday. Ran fine for a while, but when I increased speed with on "continuous," the motor cut out. I pressed "continuous" again with lower speed and it would turn on for a split second and it cut out again and so on. Batteries were low. Is this the sign of low-charged batteries or is there a short? Quote Link to comment Share on other sites More sharing options...
bobbymalone Posted May 19, 2010 Share Posted May 19, 2010 i would try it again with full batteries before I even thought about anything else. Quote Link to comment Share on other sites More sharing options...
blakeb Posted May 19, 2010 Share Posted May 19, 2010 my 24v power drive v2 does this exact same thing, run it wide open for a lil bit and it cuts out, no matter the charge on the batteries Quote Link to comment Share on other sites More sharing options...
Esox_Magnum Posted May 19, 2010 Share Posted May 19, 2010 Sounds like to light of wire gauge and tripping the breaker, assuming you have an auto reset?? Quote Link to comment Share on other sites More sharing options...
blakeb Posted May 19, 2010 Share Posted May 19, 2010 i have to manually reset my breaker, i was suspecting light gauge wire was my culprit, i will start there, thanks magnum Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.