Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

200yd muzzleloader load


Recommended Posts

Last fall I purchased a TC encore endeavor. I enjoy shooting the gun and can get 3-4 inch groups at 100yards after some practice. I am shooting 250 grain shockwave sabots with 100 grains of powder pellets.

I tried using 150grains of pellets at 100 yards once to see what it would do. By the dust cloud behind the target it seemed to shoot high and to the right. I am told the extra powder makes you lose accuracy. I have not tried the 200 yard shot yet. I don't want to waste too many bullets, and time while not understanding what is going on.

My question is with a heavier powder charge, should you up the bullet grain into the 300-400> grain to retain your accuracy? Or should I accept the drop in trajectory and calculate this into my shot with the lighter load. This is becoming a hands on education in ballistics. Any information will be appreciated.

Link to comment
Share on other sites

I was told by a oldtimer blackpowder shooter that the extra powder is just that and all it does is make extra smoke at the end of the barrel.

I have tried 150 grains thur mine and dont get very good grouping thru mine at all I think the best I have found is 90 grains pyro and 250 grain shockwave but I shoot 100 grains pyro pellets for ease and have great results with this also.

Each gun is different when it comes to blackpowder and if you want the best possible accuracy you should try variuos loads of powders and bullets to find what your gun is most accurate with.

Link to comment
Share on other sites

I shoot 150 grains of tripple 7 and a 250 grain hornady, last year I shot 3 inch groups at 150 yards and killed a buck at 130 yards and a doe at 180. With this combination I sight in 3 inches high at 50 yards and puts me dead on at 150 yards.

Link to comment
Share on other sites

I shoot TC Pro Hunter 250 Grain EZ Slide with 150 grains of Triple 7 Powder. 50 yards is exactly same at 100 yards which took me a half day and way too much money to figure out. I tried 100 grains and I had a lot of issues with mine not grouping. Seems stupid but the one extra pellet makes a day and night difference atleast with my gun.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.