canobeans Posted April 18, 2010 Share Posted April 18, 2010 My new minnkota fortex keeps cutting out, not working, even if its not hot or used on max for long periods of time. I have circuit breakers on my battery like they recomend. Am wondering if i have a bad trollin motor, or its not hooked up properly? Quote Link to comment Share on other sites More sharing options...
delcecchi Posted April 18, 2010 Share Posted April 18, 2010 Is there any way for you to tell if it is your breaker or the trolling motor that is malfunctioning? How long does it cut out for? Could just be a bad or too small breaker. Quote Link to comment Share on other sites More sharing options...
Esox_Magnum Posted April 18, 2010 Share Posted April 18, 2010 My thoughts to, to small of breaker or to small of wire gauge. A 24V should be no less than 8ga 6 would be better and so on. Quote Link to comment Share on other sites More sharing options...
slammer Posted April 18, 2010 Share Posted April 18, 2010 Minn Kota recommends 6 gauge wire and a 60 amp breaker on 24 volt systems. I would start at the breaker also. Quote Link to comment Share on other sites More sharing options...
canobeans Posted April 19, 2010 Author Share Posted April 19, 2010 Thanks for the info. Not sure what the breakers are. I have a 97 skeeter so i think its the factory wiring. Dont know what size that is Quote Link to comment Share on other sites More sharing options...
mamohr686 Posted April 19, 2010 Share Posted April 19, 2010 The problem is an easy fix in the foot pedal. The fortrex has an adjustment under the pressure knob that allows you to make better or worse contact. The purpose was to ensure that as the pedal wears, that the button/contact will not wear out like on some of the maxxum motors. I googled it and found my answer on a walleye fishing HSOforum, that had pics and everything. I had the opposite problem where my motor would start to run without any pressure on it. Quote Link to comment Share on other sites More sharing options...
canobeans Posted April 21, 2010 Author Share Posted April 21, 2010 Thank alot. Still kind of dont like the motor cause i think the button is too small, but thanks for the help. Quote Link to comment Share on other sites More sharing options...
canobeans Posted April 21, 2010 Author Share Posted April 21, 2010 i didnt the adjustment knob when i looked. Do u remember the site where u seen the picture? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.