Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

The Happy Troller


Guest

Recommended Posts

Anybody out there happy with their trolling plate called "The Happy Troller"? After so many inquiries as to the price and availibity in my area, there was a guy who told me that he would not recommend it because if you forget to pull it up, the prop cavity would blow itself up. Any truth to that? What's the worst it could happen if you forget to pull it up and you rev the boat...?

Link to comment
Share on other sites

I used one on a 25 horse. Worked good.
Its spring loaded so it pops up and locks up till you release it. I dont remember haveing to release anything when its in the down position. If I did it wanst any big deal.

Link to comment
Share on other sites

We mounted one on the back of a Merc 260 i/o for salmon fishing Lake Michigan. If you did forget to raise the plate before plane, the plate flexes and bends out. It doesn't blow up. Over the years, we probably forgot to raise it 4 or 5 times. We would just bend the plate back down and it worked fine.

The replacement plates aren't that expensive.

Link to comment
Share on other sites

Suddenly Summer. I have a 120 I/O Merc Cruiser. Would you recommend the Happy Troller for this? We usually fish the smaller lakes - largest being Big Cormorant and Pelican. Or would we be happier with a regular trolling motor?

------------------
Phyl

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.