Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

First snowmobile??? Help!!!!!!!!


JoeKer

Recommended Posts

I'm looking to buy my first snowmobile in MN and have a few questions?? When buying from a private party what paper work do I need title, receipt, etc. Transfer title cost? What do I need to do to get it registered stickers, certificates, etc. Do I have to have insurance on a snowmobile? Pay taxes on it, if so how is it figured?? Any useful info. is greatly appreciated!!! Thanks in advance!!! It's for MN......

Link to comment
Share on other sites

Thanks!! Do know if insurance or anything like that is required?? Do you have to do everything right after you purchase it or can you wait awhile if you don't plan to use it right away?? Sorry for all the questions!!!

Link to comment
Share on other sites

Just the registration card is needed. I did not even have bill of sale, and I transferred two and a trailer. Pop for the 3 year trail sticker, will save you time and effort over the one year.

I would do it right away, it only takes a few minutes... but if you don't plan to use it this year, then don't get the trail permit until you plan to use it.

Link to comment
Share on other sites

MN DNR has all the info on the web site. Cost and everything. If the sled has current regestration you can run on that until it expires same with trail stickers. I think you have 15 days from purchase if memory is correct.

I just did mine 2 weeks agon. Only needed registration card and my MN DL. took all of 5 min.

Link to comment
Share on other sites

Striaght from the MN DNR HSOforum

Residents born after December 31, 1976 must have a snowmobile safety

certificate in their possession, or snowmobile safety certificate indicator on

their driver’s license or on their Minnesota ID card, to operate a snowmobile

in Minnesota. To become certified in snowmobile safety, students must pass a

Minnesota snowmobile safety training course.

Youth Snowmobile Safety Training

The Youth Snowmobile Safety Course is available to youth ages 11

years and older. (Safety training certificates are not valid until age

12.) This course is at least 8 hours in length and is taught

by DNR certified volunteer instructors. The course teaches the basics

of safe and responsible snowmobiling. It covers operating

procedures, machine maintenance, rules and regulations, accident

prevention, outdoor survival, environmental awareness, and a

code of ethics. The course includes both a written test and a riding

performance test that must be passed. A fee of $5.00 - $10.00 will

be charged to cover the cost of materials and certification.

Adult Snowmobile Safety Training

The Adult Snowmobile Safety Training CD is an independent study

course on CD. The course is available to persons 16 years of age

and older. It looks at the cause of accidents, speed and reaction

time, stopping distances, group riding and rules and regulations. The

course is designed for multiple users and includes a written test and

send-in certification form. A fee of $10.00 will be charged to cover

costs of material and certification.

Youth classes are taught by certified volunteer instructors, usually

between November and March. Courses are announced in communities

through schools and the media. To learn the times and dates of classes

in your community, or to receive the Adult Snowmobile Safety Training

CD, check the DNR web site www.mndnr.gov/snowmobiling; or call the

DNR Information Center 1-888-646-6367, metro area (651)296-6157,

or the Snowmobile Safety Training Program Headquarters at

1-800-366-8917.

Link to comment
Share on other sites

witgey&water-

Thanks for the info on the Adult Snowmobile Safety Training!!! I was looking for that exact info so I called the DNR # you provided and they will be sending a CD to my house to take the test!! Thanks again

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.