Marcum spins but no light????

[beretta]

I have an LX-3 that spins when I turn it on but the light does not show up. Any suggestion? I tried another battery thinking it might be a very low battery but it didnt make any difference. I also checked the transducer plug in and that was fine as well. Any suggestions would be appreciated!

[Jim Almquist]

Sure sounds like there is no power to the leds so just give Marcum CS a call and get a RA and they will have it fixed in no time. If it would not spin I would say power but it takes more power to turn the motor then it takes to light the leds.

From there HSOforum:

Repairs & Returns

Is your product in need of a repair? In order to complete your repair as quickly as we can please call us at 888-778-1208 or send an e-mail to us at [email protected] with your name, address, and phone number plus, tell us what the problem with your unit is. We will send you a Repair Authorization number. Please follow this procedure:

Please send your unit to: Versa Electronics, Attn MarCum Service Center, 3943 Quebec Ave, Minneapolis, MN 55427

Place the product in the original box if possible. Write the return authorization number on the outside of the box. Surround the product in newspaper or suitable packing material. Print or write your name, address, phone number and e-mail address and write down the problem with the unit onto a piece of paper and place it in the box. Seal the box with packing tape. Mail or UPS the box to us. You may want to insure the contents. If your product is not under warranty we will contact you with an estimate of repair charges. If you need to know the status of a repair please send an e-mail to [email protected]. We will respond with the status of your repair within 48 hours of your request. Or if you have not had your unit returned in due time call 888-778-1208.