some new wheelhouse ???

[bottom-bouncer]

I am getting ready to build a new wheelhouse. I have a few questions maybe you guys can help me out with I want to put the forced air furnace up front this time . next to or under the oven what would your suggestions be as far as clearence or will the heat from the oven cause problems with the furnace? second question is anybody using rubber gas lines from the regulatot into the house. I have copper now but I am always worried about it getting crushed or damaged. thnks

[GRAND DAD]

When I built mine, I coverd my Copper pipe with PCV pipe so it wouldn't get damaged or crushed going down the road, and then ran rubber up from under the floor to the heater and ran rubber from the front of the house to the tanks.

[minnbowhunter]

I would check the clearance dims. that the manufacturer recommends for the stove and go with that. My line to the forced air furnace is rubber all the way to the reg. came that way from the builder.

[bottom-bouncer]

I would check the clearance dims. that the manufacturer recommends for the stove and go with that. My line to the forced air furnace is rubber all the way to the reg. came that way from the builder.

have you had any issues with weathering?

[kevfish1]

all I have ever used is rubber-- never had a problem

[bottom-bouncer]

thnks guys I am going to use rubber then. and shouldnt have a problem getting the stove and furnace into the same cabinet.