Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

walleye techniques


IRISHbaseball

Recommended Posts

You think Canada and say that aint fishin,thats catchin.While that can be true in some waters up there you still need to know a walleyes seasonal movements.In spring and most of the time, your best,cheapest and one of the most effective methods will be jigging.Theres no one trick I have at least to catching walleyes all the time,read up on the species and find out as much info on the water your going to be fishing.Minnows and leeches work well in spring so those would be my 1st options to fish with.Good luck on your trip this spring...

Link to comment
Share on other sites

Jigs, spinners and lindy rigs is all you need. Bring some Gulp shiners/smelt for your jigs for sure. Floating gulp crawlers for your spinners. These are cheaper than live bait up there and have done very well for me on some canadian lakes. They also save you from getting cold hands in the spring.

I always have some in the boat now.

I would also bring some Berkley Flicker Shads and Reef Runner 600 series cranks. Firetiger, red n gold/ pink lemoneade, fire perch, silver clown and chart/white are always good. Maybe a purpledescent and cheap sunglasses.

Link to comment
Share on other sites

You can't beat Rapala original floaters F11 in gold for stained water, silver for clear water, and yellow perch (which is a new color) in either water. The F11 is the smallest in length three treble hook rap. If the water is still cold 42 to 60 degrees in the spring it is a proven fish catcher.

Keep Catchin'

Turk

Link to comment
Share on other sites

For me, Canadian fishing pretty much means vertical fishing with jigs and minnows if the fish are deep, and pitching jigs and plastics if the fish are shallow. I like bright colored jigs, mostly 1/8 to 3/8 ounce sizes.

In all honesty the rod you're using and even the line you're using is probably more important than the bait, as long as you're in the right size / style of jig. A sensitvie rod with a fast tip is important for jigging, and I prefer copolymer line or monofilament unless I'm fishing deep.

A couple other "tricks" you can try --- if the fish are shallow, casting shad raps, minnow raps, or similar baits can work well. An outstanding bait that gets used on rivers all the time but is almost never seen on lakes are blade baits. Drop shot rigging with plastics will put plenty of fish in the boat too. And if you have really big minnows available I like to fish them on split shot rigs with #6 kahle hooks instead of on jigs --- it lets the minnows swim around a bit and I think it's a solid technique for bigger fish.

Link to comment
Share on other sites

We've been going to the Lac Seul every June since 2000 and we bring one type of lure... 1/4oz. jig and minnow. Hit the shallow water (right at shore) and hop 'em back to the boat. I used to bring my whole tackle box but now it's been reduced to about 4 doz. 1/4oz. jigs in various colors.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.