Guests - If You want access to member only forums on HSO. You will gain access only when you sign-in or Sign-Up on HotSpotOutdoors.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
ricbak

Lowrance depth finder ???

5 posts in this topic

I have a Lowrance LCG-2400, and it decided to quiet working this past weekend, my problim is when I push the (pwr) on button it turns on and shuts off immedietly. any helpfull ideas would be greatly appreciative. thanks ricbak

Share this post


Link to post
Share on other sites

I used to have a similar problem on an older Lowrance locator. My problem was due to a bad connection. Check your wires and the fuse link on the hot wire to be sure theres no corosion causing a weak connection. I eventually had to replace my fuse link and that took care of the problem.

Not saying this is yours, but it sounds like you have the smae thing going on.

Share this post


Link to post
Share on other sites

I too have had this problem with a depthfinder as well as a GPS. Like Dave, I found that I had issues with the power cable on one and the fuse link on the other. A good cleaning took care of both. Good luck!

Share this post


Link to post
Share on other sites

I also have had this problem, check the main power switch connections, this can cause the unit to cycle on and off.

Share this post


Link to post
Share on other sites

thanks for the reply's, after a little cleaning with emery cloth and replacing one cable end my depth finder is up and running again. thanks ricbak

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  
Followers 0