Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

How warm is to warm for sled?


Spunky

Recommended Posts

Going to head out next week and they are talking temps in the fortys, was wondering what you all thought about how warm is to warm to run your sled in this warm weather? Don't want to lock it up.

Link to comment
Share on other sites

Is your sled liquid cooled or air cooled? If it’s liquid cooled it should be alright as long as you have snow to run through. Because the snow will provide cooling to the cooling rails up under the tunnel were their located.

If its air cooled, I wouldn’t suggest running it over 32 degrees.

Link to comment
Share on other sites

ive drivin my old bogi wheel snowmobile around in july for quite some time.. i wount ride a air cooled sled with a hood for along time above 50.. liquid doesnt really matter just stop and check everey now and then that the snow or water is getting on the rails..

Link to comment
Share on other sites

As long as you are jetted properly you should be ok.

Just keep moving, and in the case of a liquid, there needs to be enough water/snow/slush to keep the heat exchangers wet.

With a free air, again, keep the airflow moving.

In all cases, the slides need water snow to keep them from melting to the track clips.

Link to comment
Share on other sites

As long as you are jetted properly you should be ok.

Just keep moving, and in the case of a liquid, there needs to be enough water/snow/slush to keep the heat exchangers wet.

With a free air, again, keep the airflow moving.

In all cases, the slides need water snow to keep them from melting to the track clips.

Exactly!!! Air cooled sled motors just need air. If your hood has vents that can be opened it will help. We run air cooled sled motors on ultralights all summer long with no ill efects.Fresh air to the fan intake is the key.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.