chillincarp870 Posted March 14, 2009 Share Posted March 14, 2009 Hey guys i have a 1996 ford ranger and when i turn on my left turn signal it will blink until i hit the brake. When the brake is on the blinker is just on and not flashing. The right blinker works fine. Is it just a bad switch??? any other ideas?? Quote Link to comment Share on other sites More sharing options...
Scott K Posted March 14, 2009 Share Posted March 14, 2009 I would check the rear bulb. Quote Link to comment Share on other sites More sharing options...
Jeremy airjer W Posted March 15, 2009 Share Posted March 15, 2009 and/or bad ground for the rear lights on that side? Quote Link to comment Share on other sites More sharing options...
Scott K Posted March 15, 2009 Share Posted March 15, 2009 Ha, I thought I typed that exact thing with the ground, but must have forgot that. Quote Link to comment Share on other sites More sharing options...
chillincarp870 Posted March 16, 2009 Author Share Posted March 16, 2009 do you guys know where the ground would be? i don't think it is the bulb because the bulb lights up when the blinker is on. Quote Link to comment Share on other sites More sharing options...
Jeremy airjer W Posted March 16, 2009 Share Posted March 16, 2009 You would be surprised what kind of problems a bulb can cause! At least inspect the bulb and sockets. Make sure the metal tangs aren't burnt up and the socket isn't corroded. Quote Link to comment Share on other sites More sharing options...
Scott K Posted March 16, 2009 Share Posted March 16, 2009 The ground for it is located behing the left front cowl panel, the drivers side kick panel. The panel that the drivers left foot would hit if you tipped it to the left.One more thought, if this has a trailer harness, unplug it under the rear bumber and plug the factory connectors back in. The trailer harness will have a t-connector that just connects between the factory connector. Quote Link to comment Share on other sites More sharing options...
IFallsRon Posted March 16, 2009 Share Posted March 16, 2009 I don't know Ford, but a Chevy has a control module in the tail light assembly that goes bad. I had an off-speed blink and the lights were on but very dull. Quote Link to comment Share on other sites More sharing options...
crothmeier Posted March 16, 2009 Share Posted March 16, 2009 Sounds like you need to flush and change your blinker fluid. that might do the trick Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.