Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Scope advise


TV BOY

Recommended Posts

Need some opinions on what power scope to put atop a .308 . I would like to try some longer distance target shooting but at the same time I might use it if I ever hunt Zone 1 for deer and the area where my in-laws are it is fairly wooded and I think it would be hard to find a shot over 200 yards. Taking out an occasional coyote would also be fun. Is a 3 x 9 powerful enough to shoot 200+ or should I lean towards a 4x14?

I should add that I have always been a Zone 4 hunter.

[This message has been edited by TV BOY (edited 03-16-2004).]

Link to comment
Share on other sites

2.5-10X40, 44 or 50 all sound neat, but I'm not fond of the huge objective lenses. The problem with 2.5-10 power is that you pay big money to get that magnification in a scope. Nikon Monarch gold, Leupold VX3, Bushnell Elite 4200 are the three I can think of. (that Elite is a great value in my opinion.)

Link to comment
Share on other sites

Tvboy, I just bought a remington rifle to take elk hunting next fall. I put a Burris Fullfield 4x14 40 mm obj. When I bought it the salesperson allowed me to compare this one with other scopes they sell. I think the burris was as good as the more expensive scopes. I don't have much experience with scopes except for long range/ varmint scopes. Then you get the scopes with the highest magnification with the largest objective. It really helps when your shooting at a pop can sized target at 500 or more yards.

Scotty

Link to comment
Share on other sites

TV Boy

Go with the best optics that you can afford. I have 3X9X50 Leopold Varix2 on my .338 (for Elk)and 3X9X40 on my .308 (for Mule Deer. Love 'em. My son (who is 12)has a new .270 WSM with a 3x9x40 Burris (all he could afford for now). All work wonderful. Usually I hunt with the scope @ 4-5X with plenty of magnification in the mountains here in Wyo. For siting in @ 200 yds I usually run 7-9X. Hope this helps!

Link to comment
Share on other sites

Right now i'm leaning to the vxIII 4.5-14 x 40 long range or the zeiss conquest 4.5-14 x 44. Both of these have side paralax adj.

Am I assumeing correctly that I need the paralax adj? Because leupold has the 4.5 - 14 x 40 without it also.

Thanks for the advise so far smile.gif

Link to comment
Share on other sites

I have used a few different scopes. fixed power 4 was the first one for deer. Now I use a 4.5-14 with a 44mm optical. I love it. I also got my dad set up with a 1.5-6 on his .308 but that is only for deer.

If you are used to the higher magnification the 4 for the low end should be fine. If you do not usually shoot with that high of power you will need to get used to sighting in the closer fields.

Mine has the range adjustment to focus on the end of the optical. it twists like a camera lens. It has stood up to the use in the woods and in the rain. It is on my .7mm.

Link to comment
Share on other sites

I had the chance to shoot a similar gun with a 3x9 scope yesterday. Boy was it WINDY ! I shot 10 rounds with some mystery russian ammo and then 2 five rounds with some 165gr Federals. The russian ammo was fmj's and they didn't pattern too well @ 100 yds. The federal's grouped within 1" and 1.5" ! I couldn't believe it with how windy it was and how hard it was to hold still. I can't wait to get my rifle now. grin.gif

I was using the 9 power and I think that I could use a little more for 100+ shots.

Link to comment
Share on other sites

What I've learned is that you want to keep the scope in the Times 3 range for better clarity. 3x9, 4.5x14, 6.5x20 and so forth. Another thing you might want to keep in mind is the eye relief. I put a Leupold 6x18 Vari X II on my 220 swift and didn't like the eye relief. Had to hold it the perfect distance away to see the "whole" picture. I sold that and put a Nikon Monarch 6.5x20 Illuminated Milldot that I find is a lot more forgiving. My buddy has a Burris on his gun that is really nice too. Just my two cents.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.