Mora Nova Auger.. Looks identical cutting system to Nils

[Bigslugger]

This looks like the identical cutting system as the Nils

[Todd_J]

At 16 seconds you get a very good look at the blade assembly. It shows two bolts and two nuts holding each of the two blades in place. This is not the case on the Nils auger. The blade on the Nils is one continuous unit that is affixed to the auger by a single nut/bolt along the shaft.

[deadeye]

Interesting. I like that the blades are replaceable.

[hamms-scooter]

this is a sweet auger its only a four inch though i believe on the web site for it it says 110mm thats 4.34inches. if it came in a 6 that would be mint

[Bigslugger]

http://www.moraofsweden.se/index.php?id=46

look up the auger drills and powerheads. Identical to those of a SM

[hamms-scooter]

i see you can get bigger ones.this will give nils a run eh you can attach it even sweet

[Bigslugger]

Look at the hand augers also. They make a mini one! The Mora Ice Micro! its tiny

[hamms-scooter]

these are cool thanks bigslugger! hey just got the vex light with the three leds cant wait to use it!