Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Heather's Malibu

CNY Tim
 Share

Recommended Posts

CNY Tim Grand Master

CNY Tim

Posted
Posted

Well the saga continues on the way to Midas after Heather had a week free of driving to and fro with no problems it started acting up again after work last night and on the way to the Midas appt. this a.m... It stalled 3 times on the way to Midas and I ruined the paint on the front end of my Silhy pushing her the rest of the way. Barring if they can get it done there today I may have to bring Heather back to Syracuse tomorrow. Can anything go as planned?? Well at least I wasn't an hour and 45 away on a fishing trip blush

Sounds like were in the 4 - 7" range as far as snow, lovely...

Link to comment
Share on other sites
USMC130FE Community Regular

USMC130FE

Posted
Posted

Timmy,

hopefully it will get fixed right this time. Sounds like a sensor or something by the way its acting.

This snow down here is going to suck!! Calling for 8" by tomorrow AM cry Just when its going to get cold enough to get more that 4 inches of ice, now I'm going to have a insulating blanket over it.

Link to comment
Share on other sites
CNY Tim Grand Master

CNY Tim

Posted
  • Author
Posted

Steve I left a message with Lee on his cell about the earlier departure. If your getting all that predicted snow on only 4" of ice that smells like slush underneath that weight. Check it out during the day tomorrow and make sure were good to go, it's a long haul...

Link to comment
Share on other sites
CNY Tim Grand Master

CNY Tim

Posted
  • Author
Posted

Well so far it's seems to be the crankshaft sensor back by the transmission. When he removed the module the wiring was fried. I guess they are something that goes on these 3.1's from time to time. It also has a new ignition sensor and with labor plus a tow the whole job was $760. crazy I'll be driving it around the next week and a half to make sure all systems are go before we bring it back to Heather in Syracuse. What get's me is there no codes on the computer you would figure maybe a soft code would come up on the history but heck no frown I'm keeping my fingers crossed..

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Your Responses - Share & Have Fun :)

    • rundrave
      Problems with Yetti

      By rundrave · Posted

      got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • Macgyver55
      Random Daily Pics

      By Macgyver55 · Posted

    • smurfy
      Just Food and Drink

      By smurfy · Posted

      By The way that didn't work either!! Screw it I'll just use the cellular. 
    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • Mike89
      Just Food and Drink

      By Mike89 · Posted

      I grilled some brats yesterday, maybe next weekend will the next round...  
    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • Mike89
      Problems with Yetti

      By Mike89 · Posted

      good luck!!!   
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept