dogs Posted December 22, 2008 Share Posted December 22, 2008 Have a 95 F-150 4x4, manual transmission. the problem is clutch is working fine, except when I take out of gear and release cluch I hear a grinding noise. Could it be throw out bearing?Thanks Dogs Link to comment Share on other sites More sharing options...
zamboni Posted December 22, 2008 Share Posted December 22, 2008 Might want to ask in the automotive forum, or ask a Moderator to move this Link to comment Share on other sites More sharing options...
Macgyver55 Posted December 22, 2008 Share Posted December 22, 2008 The throw out bearing is in use when the clutch is depressed. It should not be turning when the clutch is released. More likely the noise you hear is the input shaft bearing in the transmission. Link to comment Share on other sites More sharing options...
Shack Posted December 22, 2008 Share Posted December 22, 2008 Are you hearing this grinding as you shift gears (Clutch pressed down and coming out of first and then into second, or any other gear shift)? Or is it after the gear change and as you are releasing the clutch pedal? Link to comment Share on other sites More sharing options...
Jeremy airjer W Posted December 22, 2008 Share Posted December 22, 2008 Sounds to me like its idling or coasting with the clutch pedal out and the transmission in neutral. Link to comment Share on other sites More sharing options...
dogs Posted December 23, 2008 Author Share Posted December 23, 2008 Yup thats it airjer when it is "idling" out of gear and the clutch is out; pedal not depressed. Thanks Guys Link to comment Share on other sites More sharing options...
Recommended Posts