Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Couple questions concerning topwaters and line


Recommended Posts

I have a few topwaters that I am looking to throw this spring for pike, namely Zara Super Spooks and Wounded Spooks. I was wondering if using wire leaders (Berkley 18") would be significantly detrimental to the lures action. Should i ditch the leader and risk a bite off, or does the leader not affect the action too much?

My second question concerns line. I am looking for a good mono that will work well for pike. I'm generally looking in the 20 lb. test range. I have heard good things about Sufix ProMix (formerly DNA) and was wondering if anyone has first hand experience with it. Other mono suggestions are also welcome.

Any info on the above topics is greatly appreciated. Thanks in advance.

Link to comment
Share on other sites

I wouldn't use a leader. If you try a leader you'll quickly see the negative impact the steel has on the movement. I think I've lost 2 lures to pike usually when I was using small topwaters for smallmouth. Anyway keep the line tight and set the hook fast.

I've heard different ideas but I prefer a non-stretch super line like Power Pro. More expensive but definitely worth it. I also like that for the most part it floats which is good when casting and trying to set the hook quickly during a quick hit.

Link to comment
Share on other sites

For sure no leader like T-water said. The action is killed when you use one. You might lose a lure here and there, but that is better than sitting there all day walking a spook and not having any action all day. I think a braided line would work better in topwater use as well. It will hold up better and give you that quick set opportunity. Also a bit harder for the pike to cut it, although still somewhat easy, it does offer that little edge.

Link to comment
Share on other sites

I would use a leader. I use topwaters a lot for smallmouth early in the year and lose a fair amount to pike. I don't notice leaders hurting the action too much when muskie fishing, and it's no different for pike (unless you're using fairly small lures).

If you really think no pike are hitting because of the leader, try not using one. If pike are smacking topwaters they're usually not finicky. I use stiff, single strand leaders.

Link to comment
Share on other sites

Thanks a lot for the input guys. Fish&Foul, when you say fairly small lures, about what size are u referring to? I believe the Super Spook and Wounded Spook are 7/8 oz. and 3/4 oz. respectively. Do you think these would be heavy and buoyant enough to not be affected by the leader? If I was to use a leader would a shorter or longer leader better serve the purpose?

What about titanium or fluorocarbon leaders? Would either of those options provide strength and resistance to bite-offs while not inhibiting the action too much? I've heard some positive things about both of these. Anyone have any information on them as it pertains to topwater? Thanks again.

Link to comment
Share on other sites

I would say with lighter, smaller lures like that you might have more leader issues. If you use lighter leader or a fluorocarbon leader I think it would work fine. I have heard some not-so-good things about Titanium, the biggest being the loss of strength with no visual signs.

Just do some experimenting with different leaders and lures and find what works. Hopefully you'll find an effective combination that works for you and catches fish!

Link to comment
Share on other sites

 Originally Posted By: Neighbor_guy
As far as your line issue goes, I use Iron Silk for pike and have had good results.

I used Iron Silk last season and was pretty pleased with it, but I'm looking to try out some new ones to find one that is perfect for me. Iron Silk is great but i have a feeling there is a line out there that will suit me better.

Link to comment
Share on other sites

 Quote:
I was wondering if using wire leaders (Berkley 18") would be significantly detrimental to the lures action.

in a prior post i slandered the knottable leader wire, but for this purpose of smaller walk-the-dog lures it is a good option ''IF'' your inclined to use a leader. it's a little bit more supple. mabe try all of the above and decide on one/not one. i've tied lures direct in an attempt to get a muskie to hit when they don't on anything and just follow. works but i have lost tackle. really in the long run you can never have one too many leaders.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.